Product Information Guide

EPSON PowerLite 7850p Projector
6/03 EPSON PowerLite 7850p Projector - 13
5. When done making settings, press
ESC on the remote
control to highlight the
OK button at the top of the screen.
Then press
Enter. Highlight the OK button again and press
Enter to return to the main EasyMP Network Screen.
Configuring the Network Settings on Your
Computer
Before connecting to the projector wirelessly, make sure the
network settings for your computer match the settings you
entered for your projector. Also, make sure that the Internet
Connection Firewall is disabled. (See your Windows online
help system for details.)
1. Access your wireless network Properties window. For
example, in Windows XP click
Start > Control Panel >
Network and Internet Connections
. Then double-click
the
Network Connections icon. You see a screen similar to
this:
2. Right-click the
Wireless Network Connection icon and
select Properties. You see a screen like this:
Projector name Give the projector a unique name to
make it easy to identify. To rename it,
highlight the Clear button and press
Enter. Then highlight the text box
and press Enter.
ESSID Ad Hoc: Enter an ESSID if your
network supports an SSID or ESSID
identifier. Otherwise, select Channel.
Access Point: Enter the name
assigned to your access point when it
was set up.
Remember that the ESSID is case-
sensitive.
Password for WEB
control
If you want to create a password for
remote access, you can enter up to 8
alphanumeric characters.
Projector keyword Turn this option on if you want to set
up a security keyword so that only
people in the same room as the
projector can access it. When you
connect to the projector wirelessly, it
displays a four-digit randomized
keyword on the screen that you need
to enter when prompted.
DHCP (Access Point
mode only)
If your access point assigns IP
addresses automatically, turn this
option on. Otherwise, turn it off and
assign an IP address, subnet mask,
and gateway address manually.
IP address (Access
Point mode only)
Enter the IP address you want to
assign the projector. It must be
formatted like other addresses on the
network; usually the first three
segments match the access point’s IP
address.
Subnet mask.
(Access Point mode
only)
Enter a subnet mask formatted like
other subnet masks on your network.
Gateway address
(Access Point mode
only)
Enter the IP address that was assigned
to your access point when it was set
up. If you don’t know the address, see
“Checking the Gateway IP Address”
on page 15.
WEP (Access Point
mode only)
If you want to add WEP encryption on
the projector for additional security of
wireless transmissions, highlight the
WEP button on the right of the screen
and press
Enter.
Right-click and select Properties
Click here