User's Manual
42 Displaying and Adjusting the Image
2. Use the pointer button to set
Security Lock to ON. Then
press the
Enter button.
3. Select
Password and press the Enter button.
4. When you see a message asking if you want to change the
password, select
Yes and press Enter.
5. Press the
Num button on the remote control. When it lights, the
numeric keypad is activated.
6. Use the numeric keypad to enter a four digit password. (The
default setting is 0000.)
7. When you see a confirmation message, reenter the password.
Then press the
Menu button to exit the screen.
8. Press the
Num button on the remote control to deactivate the
numeric keypad.
Starting the Projector with a Password
When Password Protect is enabled, you see this screen when you plug
in the projector:
1. Press the
Num button on the remote control to activate the
numeric keypad.
2. Enter the four digit password.
3. Press the
Num button to deactivate the numeric keypad.
The Security Lock Release screen closes, and projection begins.
caution
If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times.
Password
Password
Enter the password.
Enter the password.
[0-9]:Enter
[0-9]:Enter