Parts User Manual

15
Memo • Once the lens has been attached, gently move it left
and right to ascertain that it is fixed firmly in place.
• Use the wide attachment lens’s rear cap as the rear
cap for the front lens unit of a standard lens.
• Ensure that both the front and rear lens caps are set
in place when the wide attachment lens and the stan-
dard lens front lens unit are not being used. Failure
to observe this may result in the lenses getting
scratched.
Memo • Perform the same procedure as explained in [2-1.
Removing the Front Lens Unit from the Standard
Lens] when detaching the wide attachment lens.
• Perform the same procedure as explained in [2-2.
Attaching the Wide Attachment Lens] when reattach-
ing the standard lens front lens unit.
02_WCL_DTP_E.pm6 01.2.15, 3:04 PMPage 15 Adobe PageMaker 6.0J/PPC