Parts User Manual

2-2. Attaching the wide attachment lens

(1) Remove the rear lens cap from the wide attachment lens.

(2) Align the notch on the wide attachment lens with the notch on

the standard lens. Both notches are marked in red.

(3) Rotate it in the direction of the arrow until it will turn no fur-

ther.

(4) Insert the end of the cord attached to the front lens cap into the

projector’s case.

(5) Remove the front lens cap to use the projector.

Standard lens

Front lens cap

Wide attachment lens

Notch

Cord

Rear lens cap

02_WCL_DTP_E.pm6 01.2.15, 3:04 PMPage 14 Adobe PageMaker 6.0J/PPC