Parts User Manual

14
2-2. Attaching the long throw attachment lens
(1) Remove the rear lens cap from the long throw attachment lens.
(2) Align the notch on the long throw attachment lens with the notch
on the standard lens. Both notches are marked in red.
(3) Rotate it in the direction of the arrow until it will turn no fur-
ther.
(4) Insert the end of the cord attached to the front lens cap into the
projector’s case.
(5) Remove the front lens cap to use the projector.
Standard lens
Front lens cap
Long throw attachment lens
Notch
Notch
Cord
Rear lens cap
02_LCL_DTP_E.pm6 01.2.15, 3:03 PMPage 14 Adobe PageMaker 6.0J/PPC