User Guide

Connecting to the Projector 2
2. Select Settings from the Tool menu. You see a window like this:
3. Select Register at startup if you want the Projector Control software to
start automatically when your computer starts up.
4. Enter the IP address for the projector in the Projector IP Address field.
You cannot connect to the projector without entering a Projector IP
Address. See your projector’s documentation for information on
obtaining your projector’s IP address.
5. Enter the Web Control password or the password that was set using the
Epson EMP Monitor Utility in the Monitor Password field. If you
didn’t set a password, don’t enter anything.
6. Uncheck the boxes for the buttons that you do not want to display in
Advanced and Simple Mode.
7. Click OK to save and close the settings window or Cancel to discard
your changes and close the settings window.