User's Manual

78 Fine-tuning the Projector
4. Use the arrow buttons to highlight one of these options, then
press
Enter to select it:
■ Volume
■ Tone
■ Reset (returns the Audio settings to their default values)
5. After making any needed adjustments, press
Menu to exit.
Creating Your Own Startup Screen
You can transfer any image from your computer or video source to the
projector, and then use it as your startup screen. You can also use it as
the screen displayed when the projector is not receiving a signal or
when you press the
A/V Mute button. The image can be a company
logo, slogan, photograph, or any other image you want to use.
Capturing the Image
Start by displaying the image you want to use. It can be an image from
either a computer or video source such as a DVD player or digital
camera. Then follow these steps to capture the image and transfer it to
the projector:
1. Press the
Menu button on the remote control.
2. Use the arrow buttons to highlight the
User’s Logo menu, then
press
Enter.
3. When you see this screen, select
Yes and press Enter. A selection
box displays over the image.
Accept the present image as user’s logo?