User's Manual

62 Presenting from a Memory Card
4. Choose how you want to advance to the next cell.
■ If you want to change slides manually using the remote
control, select
On mouse click.
■ If you want your slides to advance automatically, set the
timing in the
Automatically after box. You can set any
length of time between 1 and 1800 seconds (30 minutes).
Even if you select this setting, you can still change slides
manually using the remote control.
5. To add a transition effect (such as a dissolve, fade, or wipe), select
one of the
Animation Effects and choose a Direction, if
applicable.
6. When you’re finished setting up the transition for the selected cell
or cells, click
OK.
7. Click the
Save button or choose Save from the File menu.
Continue with the steps in the next section when you’re ready to
transfer your scenario to a memory card.
Transferring Your Scenario to a
Memory Card
Once your scenario is saved, you can transfer it to a memory card. You
can use any of the following standard Type II cards. Most require a
PC card adapter to allow insertion into the projector (check with your
computer dealer for availability).
■ CompactFlash
™
■ Memory Stick
™
■ SmartMedia
™
■ Microdrive
™
■ ATA flash (does not require a PC card adapter)
note
Transition effects look
smoother when you create
them in the PowerPoint file
itself and use that file to
create a scenario.