User's Manual

Presenting Through a Wireless Network 43
If you don’t see any projectors listed, click Option, then click
Switch LAN. Verify that the correct (wireless) network device is
selected. Sometimes another network device, such as an Ethernet
card, may be selected instead. If you don’t see your wireless device
listed, but you’re sure you’ve enabled it as described in
“Configuring the Connection” on page 29, you may need to
restart your computer.
2. Once the name of your projector appears, select it and click
Connect. If more than one projector is listed, you can select
additional ones to connect to them at the same time. If the
selected projector is already being used by another person, you can
still connect to it; doing so automatically disconnects the other
user (see page 45).
3. If you set up the projector to prompt you for a keyword before
connecting, you see this screen:
Type in the four-digit number displayed by the projector and
click
OK.
note
If you want your
presentation encrypted,
click
Option and select
Use encrypted
communication
.
This step enhances security
but decreases the data
transmission speed.
Enter keyword