User's Manual

30 Presenting Through a Wireless Network
You see the following screen:
Make sure
Easy connect mode is selected, as shown above.
If not, use the arrow buttons on the remote control to highlight
the checkbox next to
Easy connect mode, then press Enter
to select it.
3. Use the arrow buttons to highlight
Advanced (next to Easy
connect mode
), then press Enter to select it.
You see this screen:
4. Make sure the projector has a unique name, so you can identify it
when connecting to it from your computer.
If you need to rename it, highlight the
Clear button next to
Projector name, then press Enter to clear the text box. Then
highlight the text box and press
Enter. Use the up and down
Easy connect mode