Product Information Guide

EPSON PowerLite 735c Projector
2/03 EPSON PowerLite 735c Projector - 7
Note: The projector might not respond to remote control
commands in these conditions: the battery is weak; ambient light
is too bright; a certain type of fluorescent light is present; a strong
light source (such as direct sunlight) shines into the infrared
receiver; or other equipment emitting infrared energy is present
(such as a radiant room heater). Correct these conditions to use
the remote control.
Using the Control Panel
The following table summarizes the functions of the buttons
on top of the projector.
Projecting Wirelessly in Ad Hoc Mode
Follow these steps to project wirelessly if you’ve already
configured your computer and projector to work in ad hoc
mode.
1. Turn on the projector as described on page 3.
2. Select
EasyMP as the source, using either the Comp/
EasyMP
button on the remote control or the Source
button on the projector (see page 7).
3. If you haven’t already done so, insert the EPSON 802.11b
card with the blue label facing up.
Note: Only the EPSON 802.11b card is guaranteed to work.
Other brands are not compatible.
You see a message that the network screen is ready to
connect. At the bottom of the screen, you see the projector
name and ESSID identifier.
4. From the Start menu, select
EMP NS Connection. You see
this screen:
If the connection is working properly, you see your
projector listed as shown. If you have additional projectors
on the network, they are also listed.
A/V Mute Turns off audio and video, displaying the black,
blue, or user logo background. Press again to turn
audio and video back on.
Zoom-in Enlarges the image size.
Zoom-out Reduces the image size.
Arrow buttons Use to navigate menus or to use the remote as a
mouse pointer when the projector is connected to
a computer with the mouse cable.
Enter Selects a highlighted menu option, or advances to
the next image in a slideshow.
Auto Optimizes the computer image.
Esc Stops the current function. Pressing Esc while
viewing a menu displays the previous menu.
Pressing while viewing a slideshow exits the
slideshow.
Button Function
Power Turns the projector on or off.
Help Displays the online help menu.
Source Switches between Computer, Video, S-Video, and
EasyMP (for wireless network and memory card
presentations).
Enter Selects a menu option when the Help menu is
displayed.
Keystone Adjusts a trapezoid-shaped distorted image; corrects
up to a ±15° tilt.
Select Scrolls through options when the Help menu is
displayed.
Button Function
Insert card into
card slot
Select your
projector