Product Information Guide
EPSON PowerLite 735c Projector
12 - EPSON PowerLite 735c Projector 2/03
Replacing the Lamp
The projection lamp typically lasts for about 1500 hours of
use. It is time to replace the lamp when:
❏ The projection image gets darker or starts to deteriorate.
❏ The lamp warning light is red or flashing red.
❏ The message
LAMP REPLACE appears on the screen when
the lamp comes on (after about 1400 hours of use). To
maintain projector brightness and image quality, replace
the lamp as soon as possible.
Contact your dealer or call EPSON at (800) 873-7766 in the
United States for a replacement lamp. Request part number
V13H010L18. In Canada, please call (800) 463-7766 to locate
a dealer.
Follow these steps to replace the lamp:
1. Turn off the projector, wait for the power light to stop
flashing, then unplug the power cord.
2. Allow the projector to cool down for at least half an hour (if
it has been on).
War ning: Let the lamp cool before replacing it. If the lamp
breaks, handle the shards carefully to avoid injury.
3. If your projector is mounted on the ceiling, unmount it.
4. Turn the projector upside-down to access the lamp
compartment.
5. Press the two tabs and remove the lamp cover.
)
6. Use a screwdriver to loosen the two screws holding the
lamp in place. (You can’t remove these screws.)
7. Grasp the lamp by the top, as shown, and pull it straight
out.
Caution: Don’t touch the glass portion of the new lamp
assembly. Doing so could result in premature lamp failure.
8. Gently insert the new lamp.
9. Once the lamp is fully inserted, tighten its screws.
10. Replace the lamp cover.
Note: The projector won’t come on if the lamp cover is loose.
ESC/VP21 Commands
Item Command
Power
On/Off
ON PWR ON
OFF PWR OFF
Signal
selection
Computer/Component
Video (RGB)
SOURCE 11
Computer/Component
Video (YCbCr)
SOURCE 14
Computer/Component
Video (YPbPr)
SOURCE 15
Video SOURCE 41
S-Video SOURCE 42
A/V Mute
On/Off
ON MUTE ON
OFF MUTE OFF
A/V Mute
selection
Black MSEL 00
Blue MSEL 01
User’s Logo MSEL 02
Auto
Keystone
ON AUTOKEYSTONE ON
OFF AUTOKEYSTONE OFF