Product Information Guide

EPSON PowerLite 505c/715c Projector
1/01 EPSON PowerLite 505c/715c Projector
- 7
Using the Remote Control
The remote control lets you access all of your projector’s
features from anywhere in the room (up to 30 feet away). You
can use it to turn the projector on and off, zoom the image,
and highlight your presentation, for example.
You can also use the remote control for EasyMP presentations
without a computer.
Open the cover just below the
Esc
button to access these
remote control functions:
This table summarizes the functions on the remote control.
Note:
The projector might not respond to remote control
commands in these conditions: the R/C (remote control) ON/OFF
switch is in the OFF position; batteries are weak; ambient light is
too bright; a certain type of fluorescent light is present; a strong
light source (such as direct sunlight) shines into the infrared
receiver; or other equipment emitting infrared energy is present
(such as a radiant room heater). Correct these conditions to use
the remote control.
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Esc
Enter
Esc
Freeze
A/V Mute
E-Zoom
Special
highlighting
effects buttons
Illumination
IR output
Power
Remote
control on/off
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Esc
Menu
Comp
S-Video
Auto
P in P
Resize
Video
EasyMP
Help
- Volume +
Menu
Comp
S-video
Auto
Picture in picture
Volume
Help
Video
Resize
EasyMP
Button Function
Power Starts or stops the projector.
Freeze Keeps the current computer or video image on the
screen.
A/V mute Turns off the audio and video, displaying the black, blue
or user logo background.
E-Zoom Enlarges or reduces the image size from 1x to 4x (in 24
steps). Pressing the right side of the button enlarges the
image, pressing the left side of the button reduces the
image. To display a portion of an enlarged image which is
outside the display area, press the Enter button and scroll
the image to the desired location.
R/C ON/OFF Turns the remote control on or off.
Button 1 Places a pointer or cursor stamp on the screen.
Button 2 Draws a box highlight.
Button 3 Places a spotlight on the screen.
Button 4 Draws a horizontal or vertical bar.
Button 5 Erases highlighting effects.
Enter
(pointer button)
Use the Enter button for EasyMP, to navigate the menus,
or to use the remote as a mouse pointer when the
projector is connected to a computer with the mouse
cable. The Enter button acts as a mouse left-click.
Illumination Illuminates all buttons on the remote control.
Esc Stops the current function. Pressing Esc while presenting
an EasyMP scenario or viewing a menu displays the
previous slide or menu. When the image source is
Computer, the Esc button acts as a mouse right-click.
Menu Displays or hides the menu.
Comp Switches to Computer image.
S-Video Switches to S-Video image.
Auto Optimizes the computer image.
P in P Displays a video or S-video image in a subscreen on the
main display. Use the Enter button to reposition the
Picture in Picture (P in P) screen, or the E-Zoom button to
enlarge or reduce the image. Changes made to the P in P
screen location and size are automatically carried over to
the next P in P session.
Help Displays the online help menu.
EasyMP Displays the EasyMP main screen.
Video Switches to Video image.
Resize Switches the display dot mode and resize mode for VGA,
UXGA, SVGA, and SXGA input. Switches the aspect ratio
between 4:3 and 16:9 when video images are being
projected.
– Volume +
Adjusts the volume.