User's Manual

Fine-Tuning Your Projector 53
6. If you want to enlarge the cursor/stamp icon, press the
bottom edge of the
Enter button (or tilt it down) to
highlight Zoom Rate. Then press the right side of the
Enter button to select 200%.
7. When you’re finished customizing the cursor/stamp tool,
press
Esc.
Customizing the Box, Line and Marker
Tools
You can change the color and line width for the line drawing
tools, and also change the shape of the box tool.
1. Press the
Menu button. You see the main menu listing,
with the Video menu highlighted.
2. Press the bottom edge of the
Enter button (or tilt it down)
to highlight
Effect.
3. Press
Enter to select the Effect menu. The Cursor/Stamp
Setting is highlighted.
4. Press the bottom edge of the
Enter button (or move it
down) to highlight the tool you want to customize.
5. Press
Enter to select the tool. You see a choice of 8 colors:
6. Press the right or left edge of the
Enter
button to scroll
through the colors until the one you want is selected (the
button next to it will be green instead of gray).
7. If you want to change the box shape or line width, press the
bottom edge of the
Enter
button (or tilt it down) to
highlight the Shape or Width setting.