User's Manual

Fine-Tuning Your Projector 49
3. Press Enter to select the Position
option. You see the following on
the right side of the screen:
4. Tilt the
Enter button in the
direction you want to move the
image: left, right, up, or down.
5. When the image is positioned the way you want, press
Esc.
Adjusting Image Appearance
Follow these steps to adjust the brightness, contrast, sharpness,
or gamma:
1. Press the
Menu button. You see the main menu listing,
with the Video menu highlighted.
2. Press
Enter to select the Video menu.
3. Press the bottom edge of the
Enter button (or tilt it down)
repeatedly to select one of the following options:
■ Brightness
■ Contrast
■ Sharpness
■ Gamma (a measurement affecting overall brightness,
contrast, and color balance)
4. Press the right side of the
Enter button to increase the
setting or the left side to decrease it. You see the effect of
your changes on the screen.
5. When the image is set the way you want it, press
Esc
.
Adjusting Image Color
Follow these steps to adjust the color:
1. Press the
Menu
button. You see the main menu listing,
with the Video menu highlighted.
2. Press
Enter to select the Video menu.
note
If you have repositioned the
image or adjusted the sync
setting, you can use the Auto
button on the remote
control to restore the default
settings.