User's Manual

40 Projecting a Presentation
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status
and let you know when a problem occurs.
power light
lamp light
temperature
light
Light Status Description and action
orange The projector is in sleep mode. You can unplug it or press the
Power
button to turn it on.
flashing green The projector is warming up. Wait for the image to appear.
green The projector is operating normally.
flashing orange The projector is cooling down. You can’t turn the projector on or
unplug it when the light is flashing.
red Power is cut off because of an internal problem. Contact EPSON
for help.
red The lamp is almost burned out. This is a good time to replace it.
See Chapter 4 for instructions.
flashing orange The lamp is burned out. Replace the lamp, following the
instructions in Chapter 4.
flashing red There is a problem with the lamp, power supply, fuse, or circuit.
Contact EPSON for help.
flashing orange The projector is too hot. Turn it off and let it cool before using it.
red The projector has turned off automatically because it has
overheated. Let it cool for a few minutes, then turn it back on.
Make sure nothing is blocking the vents on the front and top of
the projector. If it continues to overheat, you may need to change
the air filter. See Chapter 4 for instructions.
flashing red There is a problem with the cooling fan or temperature sensor.
Contact EPSON for help.