User's Manual

34 Projecting a Presentation
Turning Off the Picture
You can use the A/VMute button on the remote control to turn
off the image (and sound) and darken your screen. This is useful
if you want to temporarily re-direct your audience’s attention
without the distraction of a bright screen.
■ To turn off the picture, press the A/V Mute button. The
screen goes dark.
■ To turn the image back on, press the button again.
Working with Audio and Video
If your presentation includes video and/or audio, you can use
the remote control to select your source, freeze the action,
adjust the sound, or display picture in picture. Make sure you
have set up your projector and connected your audio or video
source as described in Chapter 1.
Selecting Your Video Source
You can use the Source button on top of the projector to
toggle between your computer and VCR or other video source.
However, you may find it more convenient to select your source
with the remote control.
You can connect two video sources to the projector if one
supports S-video and you have an S-video cable (not included).
Then you can use the buttons on the remote control to switch
between a standard video source, an S-video source, and your
computer.
■
Press the
Video
button to select a standard video source.
■
Press the
S-Video
button to select an S-video video source.
■
Press the
Comp
button to select your computer display.
After you select a source, the screen goes dark for a moment
before the image appears.
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Esc
Menu
Comp
S-Video
Auto
P in P
Resize
Video
Help
- Volume +
Select
video
Select
computer
Select
S-Video
Turn off
picture