User's Manual

30 Projecting a Presentation
Adjusting the Image Shape
The projected image may have a distorted or “keystone” shape.
This can be caused by raising the front of the projector to
position the image for your audience. You can adjust the image
shape by pressing the
Keystone button on top of the projector.
1. Press on the right + or left – side of the
Keystone button to
adjust the image shape.
2. Press and hold either side of the
Keystone button until the
image is rectangular.
Using the Remote Control
The remote control lets you access all of your projector’s
features from anywhere in the room (up to 30 feet away). You
can use it to turn the projector on and off, zoom the image, and
display the projector’s setup menu, for example.
If you have connected the mouse cable (as described on page 14
and page 17), you can also use the remote control as a wireless
mouse to run your presentation.
Keystone button