Epson PowerLite 6110i Control Panel Projector Parts Turns projector on and off Opens menu system Up/down arrows and keystone correction Focus ring Control panel Cancel/exit Zoom ring Speaker Lamp cover Air filter (air intake vent) Opens help system Remote control sensor Searches for source image Status indicators Left/right arrows and Volume down/up Front adjustable feet Air exhaust vent Projector Specifications Computer 1 and 2 (Component Video) ports General Remote control sensor Monit
Epson PowerLite 6110i Remote Control Range 19.7 feet (6 meters) Batteries (2) Alkaline size AAA Some images are automatically resized to display in the projector’s “native” format (XGA). In addition, the frequencies of some computers may not allow images to display correctly; see your computer’s documentation for details. Dimensions Mode Refresh Rate (Hz) Resolution VGAEGA 70 640 × 350 * VGA—60 60 640 × 480 * VGA—72 72 640 × 480 * 13.39 inches (340 mm) VGA—75 75 640 × 480 * 15.
Epson PowerLite 6110i Image Size and Projection Distance Positioning the Projector Follow these guidelines to get the best results when projecting: ❏ Place the projector on a sturdy, level surface. ❏ Make sure there is plenty of space for ventilation around and under the projector. Do not set the projector on top of loose papers that could block the vent under the projector. ❏ Make sure the projector is within 10 feet (3 meters) of a grounded electrical outlet or extension cord.
Epson PowerLite 6110i Turning On the Projector 3. Press the orange P Power button on top of the projector— or press the P Power button on the remote control. (If this is your first time using the remote control, make sure the batteries are installed.) Make sure your projector and other equipment are set up and connected correctly. Then turn on your projector, as described below. Note: If the Direct Power On feature has been enabled, you don’t need to press the P Power button to turn the projector on.
Epson PowerLite 6110i Selecting the Image Source Selecting the image source lets you switch between images input from different pieces of equipment connected to the projector (such as a computer or DVD player). If you don’t see the image you want, select it using the Source Search button on the projector or the Source buttons on the remote control. The Source buttons work as follows: ❏ Use the Source Search button to switch between equipment connected to the Computer1, Computer2, Video, and S-Video ports.
Epson PowerLite 6110i Turning Off the Projector Adjusting the Image and Presentation When you’re finished using the projector, follow the steps below to shut it down. This extends the life of the lamp and protects the projector from possible overheating. The following sections describe how to adjust the image and control your presentation. Note: When the projector has not received any input signals for 30 minutes, it automatically turns off the projection lamp and enters “sleep mode.
Epson PowerLite 6110i 2. If necessary, you can fine-tune the height by turning the projector’s front feet without lifting the front of the projector. Raising the projector causes the image to become “keystone” shaped, but you can correct the distortion by pressing the or buttons on the projector as described in the next section.
Epson PowerLite 6110i Switching Between Picture Sources Zooming Your Image If your projector is connected to more than one computer and/or video source, you can switch between the different sources: You can zoom in on a portion of the image using the E-Zoom buttons on the remote control. ❏ On the projector’s control panel, use the Source Search button to switch between equipment connected to the Computer1, Computer2, Video, and S-Video ports.
Epson PowerLite 6110i Operating Two or More Projectors with the Remote Control 2. Press and hold the ID button on the remote control. If you’re using more than one projector, you can control all the projectors—or just selected ones—by using the projector ID system. To operate a projector, you have to set the remote control’s ID to match that of the projector. Or you can control all the projectors at once by setting the remote control’s ID to zero.
Epson PowerLite 6110i Light Status Description Orange The projector is in sleep mode. You can unplug it or press the Power button to turn it on. Flashing green The projector is warming up. Wait for the image to appear. Green The projector is operating normally. Red High Temperature Warning. Although this is not an abnormal condition, projection will stop automatically if the temperature rises too high again.
Epson PowerLite 6110i Using the Remote Control Note: The projector has equivalent buttons that you can use on its control panel: Menu button Esc button The remote control uses a line-of-sight infrared signal. It lets you access the projector’s features from anywhere in the room—up to 19.7 feet (6 meters) away. (This distance may be shorter if the remote control batteries are low.
Epson PowerLite 6110i 3. Replace the battery cover. Make sure it clicks into place. Cleaning the Air Filter Clean the air filter when you see any of the following messages: The air filter is clogged. Clean or replace the air filter. or Check or Replace the air filter. Dust clogs prevent proper ventilation and can cause overheating and damage the projector. Note: If you installed the optional smoke filter, follow these same instructions to clean it.
Epson PowerLite 6110i Replacing the Air Filter Resetting the Air Filter Timer 1. Plug the projector in and turn it on. Replace the air filter (or optional smoke filter) when you see the Check or Replace the air filter message. Dust clogs prevent proper ventilation and can cause overheating and damage the projector. To obtain a replacement air filter or smoke filter, contact your Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.
Epson PowerLite 6110i 4. To release the lamp cover, insert the screwdriver included with the new lamp as shown, then remove the cover. 8. Once the lamp is fully inserted, tighten its screws and replace the cover. (The projector won’t come on if the lamp cover is loose.) 9. Reset the lamp timer as described in the next section. Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menu. 1. Plug the projector in and turn it on. 2.
Epson PowerLite 6110i Optional Accessories Related Documentation You can purchase accessories for your projector from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Epson PowerLite 6110i 16 12/07
