PowerLite 6100i Multimedia Projector User's Guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Setting Up the Projector
- Projecting
- Using the Remote Control
- Configuring the Projector
- Managing the Projector from a Remote Computer
- Maintaining the Projector
- Solving Problems
- Appendix A: Projector Installation
- Appendix B: Technical Specifications
- Appendix C: Notices
- Index

90 Maintaining the Projector
Cleaning the Lens Cover Glass
Clean the lens cover glass whenever you notice dirt or dust on the
surface.
■ Use a canister of compressed air to remove dust.
■ To remove dirt or smears on the lens, use a commercially available
cloth for cleaning eyeglasses.
Cleaning the Projector Case
Before you clean the case, first turn off the projector and unplug the
power cord.
■ To remove dirt or dust, wipe the case with a soft, dry, lint-free
cloth.
■ To remove stubborn dirt or stains, moisten a soft cloth with water
and a neutral detergent. Then wipe the case.
■ Do not use wax, alcohol, benzene, paint thinner, or other
chemical detergents. These can damage the case.










