5600 and 7600.
5600 and 7600.book Page ii Thursday, December 14, 2000 2:46 PM Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in this User’s Guide, do not attempt to service this product yourself.
5600 and 7600.book Page iii Thursday, December 14, 2000 2:46 PM C Contents Welcome 1Setting Up the Projector 2Using the Projector Getting the Most from Your Projector . . . . . . . . . . . . . . . . . Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . Reading This Manual Online . . . . . . . . . . . . . . . . . . . . Getting More Information . . . . . . . . . . . . . . . . . . . . . . Registration and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . .
5600 and 7600.book Page iv Thursday, December 14, 2000 2:46 PM Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Focusing and Zooming Your Image . . . . . . . . . . . . . . . 26 Adjusting the Height of Your Image . . . . . . . . . . . . . . . 27 Adjusting the Image Shape . . . . . . . . . . . . . . . . . . . . . . 27 Resizing the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Adjusting the Tracking and Synchronization . . . . . . . .
600 and 7600.book Page v Thursday, December 14, 2000 2:46 PM Maintaining 5and Transporting the Projector Solving 6Problems Appendix A: Connecting to Additional Equipment Creating Your Own Startup Screen . . . . . . . . . . . . . . . . . . . Capturing the Image . . . . . . . . . . . . . . . . . . . . . . . . . . Choosing When to Display the Image . . . . . . . . . . . . . Customizing Projector Features . . . . . . . . . . . . . . . . . . . . . Setting Advanced Features . . . . . . . . . . . . . . . . . .
5600 and 7600.book Page vi Thursday, December 14, 2000 2:46 PM Appendix B: Notices Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 89 Remote Control Information . . . . . . . . . . . . . . . . . . . . . . . 91 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . 92 FCC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . 93 Appendix C: Technical Specifications General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5600 and 7600.book Page 1 Thursday, December 14, 2000 2:46 PM W - Welcome The EPSON ® PowerLite® 5600p and PowerLite 7600p are portable projectors offering 2200 ANSI lumens of brightness. From boardrooms to auditoriums, your full-color presentations and videos will be bright and visible even in ordinary room lighting. Images are displayed at a resolution of 1024 × 768 pixels (PowerLite 7600p) or 800 × 600 pixels (PowerLite 5600p). The 1.
5600 and 7600.book Page 2 Thursday, December 14, 2000 2:46 PM Getting the Most from Your Projector note You can connect a maximum of four sources at the same time. Your EPSON PowerLite projector is a highly versatile presentation tool. You can connect it to one or two computer sources and up to three video sources and easily switch between them. You can also include sound for up to two of the sources.
5600 and 7600.book Page 3 Thursday, December 14, 2000 2:46 PM ■ Controlling Your Projector from a Computer If you want to be able to control the projector’s settings from your computer (for example, if the projector is ceiling-mounted), you can install the EMP Link V program on the Projector Software CD-ROM. For details, see page 78. note The EMP Link program is optional; you do not need to install it to use the projector.
5600 and 7600.book Page 4 Thursday, December 14, 2000 2:46 PM note If the hand changes to an index finger while holding the mouse pointer over text, you can click to jump to a related topic. You can move quickly to the topic of your choice by clicking in the table of contents on the left side of the screen. You can also use the arrow buttons in the toolbar or on the vertical scroll bar on the right side of the screen to move through the manual. For more information, see your Acrobat Reader online guide.
5600 and 7600.book Page 5 Thursday, December 14, 2000 2:46 PM If you still need help after checking this User’s Guide and the sources listed above, you can use the EPSON PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the card in your Owner’s Kit. Or take advantage of EPSON’s automated support services 24 hours a day. See page 75 for more information.
5600 and 7600.
5600 and 7600.book Page 7 Thursday, December 14, 2000 2:46 PM Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an S-Video signal, you need an S-Video cable. (One is usually provided with your video device.) ■ To receive a component video signal from a VCR or other video device having BNC connectors, you need a VGA-to-3BNC cable. You can purchase this from EPSON; see page 8.
5600 and 7600.
5600 and 7600.book Page 9 Thursday, December 14, 2000 2:46 PM 1 Setting Up the Projector This chapter tells you how to set up the projector for a laptop computer or video presentation. If you need to set up the projector for a permanent installation or connect it to a desktop or workstation computer, see Appendix A.
5600 and 7600.book Page 10 Thursday, December 14, 2000 2:46 PM Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting. caution Don’t hold or lift the projector by the lens, or you may damage it. note It’s easier to position the projector when the screen is directly in front of the room.
5600 and 7600.book Page 11 Thursday, December 14, 2000 2:46 PM If you place the projector below the level of the screen, you’ll have to tilt it up by extending the feet as shown. Tilting the projector upward causes the image to lose its square shape, but you can correct the distortion by pressing the Keystone button as described in the next chapter. note After positioning the projector, you may want to connect a Kensington MicroSaver® anti-theft device to the lock port on the projector’s left side.
5600 and 7600.book Page 12 Thursday, December 14, 2000 2:46 PM Connecting to a Laptop Computer You can connect the PowerLite projector to any computer that has a standard video output (monitor) port, including PC notebook and laptop computers, Macintosh PowerBooks, and hand-held devices. note To connect to desktops and other computer systems, see Appendix A. If you have an iBook with an RCA videoout port, follow the instructions for connecting to a video device on page 16.
5600 and 7600.book Page 13 Thursday, December 14, 2000 2:46 PM 4. Tighten the screws on the connectors. If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 22 for instructions. Connecting the Cable for Remote Mouse Control Using the remote control as a wireless mouse lets you control your computer and click through slideshow-style presentations, such as PowerPoint, from up to 30 feet away (for details, see page 40).
5600 and 7600.book Page 14 Thursday, December 14, 2000 2:46 PM Amplifying Computer Audio Your laptop probably has its own sound system; however, it may not be adequate for your presentation. If you need more volume or better sound quality, you can connect the audio cable to take advantage of the projector’s built-in amplifier and stereo speakers. 1. Connect one end of the audio cable to the Audio (Computer1) jack on the projector. audio cable 2.
5600 and 7600.book Page 15 Thursday, December 14, 2000 2:46 PM Connecting to Video Sources You can connect a DVD player, VCR, camcorder, laser disc player, digital camera, or any other compatible video source to your projector. The projector supports HDTV, NTSC, PAL, and SECAM, and automatically detects the video format. (However, if you’re using a 60-hertz PAL system, you’ll need to select PAL60 in the Video menu, as described on page 47.
5600 and 7600.book Page 16 Thursday, December 14, 2000 2:46 PM Connecting an RCA Video Cable Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Connect the yellow plug on one end of the RCA video cable to the projector’s Video jack. Video jack RCA video cable 2. Connect the other end of the cable to the video-out jack on your video source. To include sound in your presentation, connect the RCA audio cable as described on page 19.
5600 and 7600.book Page 17 Thursday, December 14, 2000 2:46 PM Connecting an S-Video Cable If your video source has an S-Video jack, you can use it to project a higher quality video image. However, you’ll need an S-Video cable, which may be included with your video source, or can be purchased separately. Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Insert one end of an S-Video cable into the projector’s S-Video connector.
5600 and 7600.book Page 18 Thursday, December 14, 2000 2:46 PM Connecting a Component (BNC) Video Cable If your video source has component (BNC) connectors, you can use them to project a higher quality video image. However, you’ll need a VGA-to-3BNC video cable, which is available from EPSON; see page 8. Before starting, make sure the projector and your DVD player or other video device are turned off. 1. Connect the VGA end of the cable to the projector’s Computer 2/Component Video port.
5600 and 7600.book Page 19 Thursday, December 14, 2000 2:46 PM Connecting the Audio Cable To include sound in your video presentation, you need to connect the RCA audio cable that came with your projector. If you’ve connected more than one video source, you can include sound for just one of the sources. (You can also include sound for your computer source; see page 14.) 1.
5600 and 7600.
5600 and 7600.book Page 21 Thursday, December 14, 2000 2:46 PM 2 Using the Projector Once you’ve connected the projector to your computer or other equipment (as described in Chapter 1 or Appendix A), you’re ready to turn on the projector, adjust the image, and give your presentation. Although you can operate the projector without it, the remote control lets you use additional features. See Chapter 3 for instructions on using the remote.
5600 and 7600.book Page 22 Thursday, December 14, 2000 2:46 PM Turning On Your Equipment Make sure your projector and other equipment are set up and connected correctly, as described in Chapter 1 or Appendix A. Then turn on your projector, as described below, followed by any equipment you’ve connected to it. You can turn on your computer and video equipment in any order, but if you have more than one computer or video source connected, you may have to switch to the desired source as described on page 29.
5600 and 7600.book Page 23 Thursday, December 14, 2000 2:46 PM 4. Press the red Power button on top of the projector. Power Power button power light The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green, and you may see a blue screen with the No Signal message displayed. This is normal. 5. Do one of the following: ■ warning Never look into the lens when the lamp is on.
5600 and 7600.book Page 24 Thursday, December 14, 2000 2:46 PM What To Do If You See a Blank Screen If you see a blank screen or a blue screen with the No Signal message after turning on your computer or video source, try the following: ■ Make sure the cables are connected correctly, as described on page 12 (for laptops) or in Appendix A (for other systems). ■ Make sure the power light is green and not flashing and the lens cover is off. ■ Try restarting your computer.
5600 and 7600.book Page 25 Thursday, December 14, 2000 2:46 PM If the Arrange option isn’t available, you may need to select one of the Simulscan resolution settings: 1. Click the Monitor icon. click here select a Simulscan resolution 2. Select a Simulscan resolution as shown. (Allow a few seconds for the projector to sync up after making the selection.) If you’re using a PC laptop: ■ Press the function key that lets you display on an external monitor.
5600 and 7600.book Page 26 Thursday, December 14, 2000 2:46 PM Adjusting the Image Once you see your image, you’ll need to make certain adjustments: ■ To focus or zoom your image, see below. ■ If the image is too high or too low, you can reposition it. See page 27. ■ If the image isn’t square, see page 27. ■ If only part of a computer image is displayed, you may need to press the Resize button. See page 28 for more information. ■ If the projected image has vertical stripes or bands, see page 28.
5600 and 7600.book Page 27 Thursday, December 14, 2000 2:46 PM Adjusting the Height of Your Image If the image is too low, you can raise it by extending the projector’s feet. 1. Stand behind the projector. Pull up the blue foot release levers and lift the front of the projector. This unlocks the feet. caution Do not hold the projector by the lens; this can damage it. 2. Once the image is positioned where you want it, release the levers to lock the feet in position. 3.
5600 and 7600.book Page 28 Thursday, December 14, 2000 2:46 PM Resizing the Image Power Computer Video Some computer images need to be resized to display in the projector’s native resolution. If only part of your computer image is displayed, you can correct it with the Resize button. A/V mute Resize Shift ■ Press the Resize button on the control panel. The screen image is automatically compressed. ■ Continue pressing the Resize button to pan around the screen in the original resolution.
5600 and 7600.book Page 29 Thursday, December 14, 2000 2:46 PM Controlling the Projector While giving your presentation, you may want to switch between picture sources, adjust the volume, or temporarily turn off the picture and sound. Follow the instructions below to access theses features from your projector’s control panel. You can also access these features, plus many others, using the remote control as described in Chapter 3.
5600 and 7600.book Page 30 Thursday, December 14, 2000 2:46 PM Shutting Down the Projector note When the projector has not received any input signals for 30 minutes, it automatically turns off the projector lamp and enters “sleep mode.” This conserves electricity, cools the projector, and extends the life of the lamp. If you are done using the projector, unplug the power cord. If you want to start projecting again, press the Power button.
5600 and 7600.book Page 31 Thursday, December 14, 2000 2:46 PM 3 Using the Remote Control The remote control lets you access your projector’s features from anywhere in the room—up to 30 feet away. You can use it to turn the projector on and off, control the picture and sound, and highlight your presentation by using it as a digital pointer.
5600 and 7600.book Page 32 Thursday, December 14, 2000 2:46 PM Installing the Batteries Follow these steps to install the remote control’s batteries: caution When replacing batteries, take the following precautions: ■ Don’t mix old and new batteries. ■ Replace batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately. Remove batteries if you won’t be using the remote control for a long time. tab 2.
5600 and 7600.book Page 33 Thursday, December 14, 2000 2:46 PM Keep the following in mind when using the remote control: A/V Mute R/C ON OFF E-Zoom 2 3 5 ■ For some functions, you need to use the Enter button like a mouse to navigate on the screen. Press the edge of the button with your thumb—or grasp it between your thumb and finger and tilt it in the direction you want to move. Power Freeze 4 ■ Stand within about 30 feet of the projector.
5600 and 7600.book Page 34 Thursday, December 14, 2000 2:46 PM Controlling the Picture and Sound You can use the remote control to select your source, adjust the volume, temporarily turn off the picture and sound, freeze the action, zoom in on the picture, or display a picture-in-picture video image. Make sure you have set up your projector and connected your audio or video source as described in Chapter 1 or Appendix A.
5600 and 7600.book Page 35 Thursday, December 14, 2000 2:46 PM Turning Off the Picture and Sound You can use the A/V Mute button on the remote control to darken your screen and turn off the sound. This is useful if you want to temporarily re-direct your audience’s attention without the distraction of a bright screen. ■ To turn off the picture and sound, press the A/V Mute button. The screen goes dark. ■ To turn the image back on, press the button again.
5600 and 7600.book Page 36 Thursday, December 14, 2000 2:46 PM Displaying Picture-in-Picture Video You can open a small video window on your computer image, and view a video at the same time as your computer presentation. First make sure you have connected your VCR or other video source using an RCA or S-Video cable as described in Chapter 1. (You can’t display the picture-in-picture window using component video.
5600 and 7600.book Page 37 Thursday, December 14, 2000 2:46 PM Highlighting Your Presentation You can highlight areas on the screen using the numbered buttons on the remote control. You can use these “special effects” features to annotate your presentation slides or call attention to your most important points.
5600 and 7600.book Page 38 Thursday, December 14, 2000 2:46 PM Using Box Highlights You can draw outline boxes on the screen to highlight areas of your presentation or video. note You can use the projector’s Effect menu to change the color and shape of the box. See page 49. 1. To activate the box tool, press button 2 on the remote control. A colored square appears in the upper left corner of the screen. This is the box-drawing tool. 2.
5600 and 7600.book Page 39 Thursday, December 14, 2000 2:46 PM Using Horizontal and Vertical Highlights With the bar tool, you can draw bold horizontal or vertical lines on the screen to underline or highlight your presentation points. You can choose from three types of bars. 1. To activate the bar tool, press button 4 on the remote control. A horizontal bar appears across the screen. If you want a vertical bar, press 4 again. If you want to try another horizontal bar, press 4 again.
5600 and 7600.book Page 40 Thursday, December 14, 2000 2:46 PM Using the Remote Control as a Wireless Mouse When you use the remote control as a wireless mouse, you can control your computer or click through slideshow-style presentations (such as PowerPoint) from up to 30 feet away. This gives you more flexibility, since you won’t need to stand near your computer to change slides, for example.
5600 and 7600.book Page 41 Thursday, December 14, 2000 2:46 PM 4 Fine-tuning the Projector You can use the projector’s on-screen menus to adjust the image, sound, and other features. You can also create your own startup screen, customize the highlighting tools, and find out how long your lamp has been in use.
5600 and 7600.book Page 42 Thursday, December 14, 2000 2:46 PM Using the Projector’s Menu System The eight projector menus let you adjust and customize the projector features from either the control panel or remote control: 42 ■ The Video menu controls the look and quality of the projected image. It lets you adjust the image position and fine-tune settings such as Brightness, Sharpness, and Contrast. ■ The Audio menu controls the volume level, treble, and bass settings.
5600 and 7600.book Page 43 Thursday, December 14, 2000 2:46 PM Changing Menu Settings You can use the buttons on the control panel or remote control to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button on the control panel or the remote control.
5600 and 7600.book Page 44 Thursday, December 14, 2000 2:46 PM 2. Press the up or down arrows on the control panel, or press up or down on the Enter button on the remote control, to scroll through the menu list. Power Freeze A/V Mute R/C ON OFF E-Zoom 3 Menu Video Sync Esc Help 4 2 1 5 Enter Esc Enter button Tracking Tracking arrow buttons Keystone Shift Volume Sync 3.
5600 and 7600.book Page 45 Thursday, December 14, 2000 2:46 PM Adjusting the Image The Video menu lets you make adjustments to the projected image. The options available in the menu depend on which source is connected to the projector: standard computer video, DVI (digital) computer video, composite or S-Video, or component video. Video Audio Effect Setting User's Logo Advanced About Reset All Position Tracking Sync.
5600 and 7600.book Page 46 Thursday, December 14, 2000 2:46 PM Repositioning the Image note Follow these steps to move the image to a different position: If you have repositioned the image or adjusted the sync setting, you can use the Auto button on the remote control to restore the default settings. 1. Press the Menu button. You see the menu screen. 2. Press Enter to select the Video menu. 3. Press Enter to select the Position option. You see the following on the right side of the screen: 4.
5600 and 7600.book Page 47 Thursday, December 14, 2000 2:46 PM ■ Tint (video only) Adjusts the balance of green to magenta in the image. ■ Sharpness Adjusts the sharpness of the image. ■ Gamma Choose Dynamic for computer images with bright colors (such as charts or graphs), or Natural to enhance video images. ■ Resolution (computer images only) Leave this setting at Auto to allow the projector to detect the video signal automatically.
5600 and 7600.book Page 48 Thursday, December 14, 2000 2:46 PM 4. Use the down arrow (control panel) or Enter button (remote control) to select the number to which you want to assign the current settings. 5. Press Enter. When you see the “Overwrite?” prompt, select Yes and press Enter. 6. Press Esc to exit the menu system. When you want to use a saved setting, press the Preset button on the remote control. You see the setting number displayed in yellow at the top right of the screen.
5600 and 7600.book Page 49 Thursday, December 14, 2000 2:46 PM 4. Use the arrow buttons (control panel) or the Enter button (remote control) to set the following options: ■ Volume ■ Treble ■ Bass 5. When you’re finished adjusting the sound, press Esc or Menu. Customizing the Highlighting Tools The highlighting tools let you add pointers and other types of annotations to your image, as described on pages 37 to 39.
00 and 7600.book Page 50 Thursday, December 14, 2000 2:46 PM 4. Use the arrow buttons (control panel) or the Enter button to customize: ■ Cursor/Stamp Lets you define the shape and size for three different pointers. For some pointers, you can also define the color and length. ■ Box Lets you define the box color and choose from a solid or outline box, with rounded or square corners. ■ Spotlight Lets you choose a large, medium, or small spotlight. ■ Bar Lets you define three different bars.
5600 and 7600.book Page 51 Thursday, December 14, 2000 2:46 PM Creating Your Own Startup Screen You can transfer any image from your computer or video source to the projector, and then use it as your startup screen. You can also use it as the screen displayed when the projector is not receiving a signal or when you press the A/V Mute button. The image can be a company logo, slogan, photograph, or any other image you want to use. Capturing the Image Start by displaying the image you want to use.
5600 and 7600.book Page 52 Thursday, December 14, 2000 2:46 PM You see the screen shown at the left. User's Logo Capture Set the zoom rate. zoom rate : 100 :Return :Select 200 300 :Execute 6. Use the arrow buttons on the control panel or the Enter button on the remote control to select a zoom rate (display size), and then press Enter. 7. When the message “Do you save the user’s logo?” appears, select Yes and press Enter. Saving the logo may take a few moments.
5600 and 7600.book Page 53 Thursday, December 14, 2000 2:46 PM Customizing Projector Features You can use the Setting menu to disable the projector’s sleep mode, adjust the image shape, and customize several other features. 1. Press the Menu button. 2. Use the arrow keys (control panel) or the Enter button (remote control) to highlight Setting. You see the options and their settings on the right side: Video Audio Effect Setting User's Logo Advanced About Reset All :Select Keystone P in P No-Signal Msg.
5600 and 7600.book Page 54 Thursday, December 14, 2000 2:46 PM ■ A/V Mute Selects the screen color or image to display when you press the A/V Mute button. The logo setting displays an image that you have transferred to the projector (see page 51). ■ BNC Specifies the format for input to the Computer 2/ Component Video port. If the source is a computer, select RGB. If the source is a video device, select YCbCr or YPbPr.
5600 and 7600.book Page 55 Thursday, December 14, 2000 2:46 PM 4. Use the arrow buttons (control panel) or the Enter button (remote control) to set the following options: ■ Language Select from 9 languages to be used for the projector menus. ■ Startup Screen Turn on to display your captured image or logo whenever the projector starts. (See page 51 for more information.) ■ Color Setting Adjusts the color temperature of the projected image. Select Absolute Color Temp.
5600 and 7600.book Page 56 Thursday, December 14, 2000 2:46 PM You see the lamp usage hours and computer display settings on the right: note If you access the About menu when the projector display is set to video, you see only the lamp life and the video signal setting. Video Audio Effect Setting User's Logo Advanced About Reset All :Select Sync Polarity Sync Mode Resolution Refresh Rate : : : : : : : : : 9999 H Computer H 999. 99 KHz V 999. 99 Hz H Positive V Negative Sync On Green 9999x9999 999.
5600 and 7600.book Page 57 Thursday, December 14, 2000 2:46 PM 5 Maintaining and Transporting the Projector Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. Any dirt or smears on the lens may show up on your projected image. warning Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers.
5600 and 7600.book Page 58 Thursday, December 14, 2000 2:46 PM Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. ■ Use a canister of compressed air to remove dust. ■ To remove dirt or smears on the lens, use lens-cleaning paper. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens surface. remove lens cap, then clean the lens Cleaning the Projector Case Before you clean the case, first turn off the projector and unplug the power cord.
5600 and 7600.book Page 59 Thursday, December 14, 2000 2:46 PM Cleaning and Replacing the Air Filter Clean the air filter at the bottom of the projector after every 100 hours of use. If it is not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. To clean the air filter, follow these steps: 1. Turn off the projector, allow it to cool down, and unplug the power cord. 2.
5600 and 7600.book Page 60 Thursday, December 14, 2000 2:46 PM 5. To install the new filter, first insert its tabs as shown, then press on the latch until it clicks in place. tabs Replacing the Lamp note You can check to see how many hours the lamp has been used. See page 55. The projection lamp typically lasts for about 1500 hours of use. It is time to replace the lamp when: ■ The projection image gets darker or starts to deteriorate.
5600 and 7600.book Page 61 Thursday, December 14, 2000 2:46 PM Follow these steps to replace the lamp: 1. Turn off the projector and unplug the power cord. warning 2. Allow the projector to cool down for at least an hour (if it has been on). Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury. 3. Use a screwdriver to loosen the retaining screw on the lamp cover. (You can’t remove the screw from the cover.
5600 and 7600.book Page 62 Thursday, December 14, 2000 2:46 PM caution 6. Insert the new lamp as shown. Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 7. Make sure the lamp is fully seated, then tighten its screws. 8. Replace the lamp cover and tighten its screw securely. (The projector won’t come on if the lamp cover is loose.) 9. Reset the lamp timer as described in the following section.
5600 and 7600.book Page 63 Thursday, December 14, 2000 2:46 PM 3. Use the left arrow button (control panel) or press left on the Enter button (remote control) to select Yes. 4. Press Enter to reset the timer. Transporting the Projector The projector contains many glass and precision parts. If you need to transport it, please follow these packing guidelines to prevent damage to the projector: ■ When shipping the projector for repairs, use the original packaging material if possible.
5600 and 7600.
5600 and 7600.book Page 65 Thursday, December 14, 2000 2:46 PM 6 Solving Problems This chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. This chapter explains the following: warning Except as specifically explained in this User’s Guide, do not attempt to service this product yourself.
5600 and 7600.book Page 66 Thursday, December 14, 2000 2:46 PM Using On-Screen Help If you see a No Signal message or your audio isn’t working, you can get help by pressing the blue ? Help button on top of the projector or under the cover on the remote control.
5600 and 7600.book Page 67 Thursday, December 14, 2000 2:46 PM What To Do When the Lights Flash The lights on top of the projector indicate the projector’s status and let you know when a problem occurs. Power Computer A/V mute power light lamp light temperature light Resize If the projector is not working correctly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector.
5600 and 7600.book Page 68 Thursday, December 14, 2000 2:46 PM Light Status Description flashing orange The projector is getting too hot. Turn it off and let it cool. Make sure the temperature surrounding the projector does not exceed 104 °F and there is plenty of space around and under the projector for ventilation. You should also check the air filter; if necessary, clean or replace it as described on page 59. red The projector has overheated and turned itself off.
5600 and 7600.book Page 69 Thursday, December 14, 2000 2:46 PM You see a blue screen with the message No Signal displayed. ■ Make sure the cables are connected correctly, as described in Chapter 1 or Appendix A. ■ Try restarting your computer. ■ If you’ve connected more than one computer and/or video source, you may need to press the Computer or Video button (on the control panel) or the Comp1, Comp2/YCbCr, or Video button (on the remote control) to select the correct source.
5600 and 7600.book Page 70 Thursday, December 14, 2000 2:46 PM The message Not Supported is displayed. ■ If you’ve connected a second computer or you’re using component video, make sure the BNC option in the Setting menu is correct. See page 54. ■ Make sure your computer’s resolution doesn’t exceed UXGA (1600 × 1200), and the frequency is supported by the projector (see page 97). If necessary, change your computer’s resolution setting as described below. Only part of the computer image is displayed.
5600 and 7600.book Page 71 Thursday, December 14, 2000 2:46 PM The image isn’t square, but trapezoid-shaped. ■ Make sure the projector isn’t placed off to one side of the screen, at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. ■ If you’ve tilted the projector upward by extending the legs, the image will be broader at the top. Hold down the + or – side of the Keystone button on top of the projector until the image is square.
5600 and 7600.book Page 72 Thursday, December 14, 2000 2:46 PM You see vertical stripes or the image still looks blurry after trying the solutions in the previous section. note The tracking and sync settings match the projector’s internal clock to the computer’s display signal. If you use the projector with different computers, you can save the projector’s settings for each computer and recall them whenever needed using the Preset option. See page 47.
5600 and 7600.book Page 73 Thursday, December 14, 2000 2:46 PM The colors of the image are not right. ■ ■ The color balance may be incorrect. If you’re displaying a computer image, use the Gamma option in the projector’s Video menu to adjust the balance of red, green, and blue. If you’re displaying video, adjust the Color, Tint, and Gamma settings on the Video menu. Also try adjusting the Color Setting option in the Advanced menu. Check your computer display settings to correct the color balance.
5600 and 7600.book Page 74 Thursday, December 14, 2000 2:46 PM Solving Problems with the Remote Control The projector doesn’t respond to remote control commands. Power Freeze A/V Mute R/C ON OFF E-Zoom 3 4 ■ Make sure the remote control is turned on. ■ Make sure you are within 30 feet of the projector, and within range of the projector’s front or back sensor (approximately 30° to left or right and 15° above or below).
5600 and 7600.book Page 75 Thursday, December 14, 2000 2:46 PM Where To Get Help EPSON provides technical assistance through electronic support services and automated telephone services 24 hours a day, as listed in the following table. Electronic support and automated telephone services Service Access World Wide Web Technical Support From the Internet, you can reach EPSON’s product support page at http://support.epson.com.
5600 and 7600.book Page 76 Thursday, December 14, 2000 2:46 PM Before you call, please have the following information ready: ■ Product name (EPSON PowerLite 5600p or 7600p) ■ Product serial number (located on the bottom of the projector) ■ Video source (computer, DVD player, etc.) and how it’s connected ■ Description of the problem You can purchase screens, carrying cases, and other accessories from EPSON by calling (800) 873-7766; in Canada, please call (800) 873-7766 for dealer referral.
5600 and 7600.book Page 77 Thursday, December 14, 2000 2:46 PM A Connecting to Additional Equipment This appendix explains how to connect the projector to a desktop PC or Macintosh, high-end workstation, more than one computer, or a DVI video source. It also provides guidance on setting up the projector in a permanent installation.
5600 and 7600.book Page 78 Thursday, December 14, 2000 2:46 PM Installing the Projector The projector can be installed for three different viewing setups: front projection, ceiling mounting, or rear projection onto a semi-transparent screen, as shown: front projection ceiling mounting rear projection To project from overhead, you’ll need to select Ceiling in the projector’s Advanced menu. To project from the rear, select Rear Proj. See “Setting Advanced Features” on page 54.
5600 and 7600.book Page 79 Thursday, December 14, 2000 2:46 PM To install EMP Link V, insert the Projector Software CD-ROM in your CD-ROM drive and follow the instructions on the screen. The installation program also installs the EMP Link V User’s Guide on your hard disk. You can access this manual in the EMP Link V folder for complete instructions on using the program. Connecting to an External Audio System The projector’s internal speakers are loud enough for most rooms.
5600 and 7600.book Page 80 Thursday, December 14, 2000 2:46 PM Connecting to a PC Desktop Computer You can connect the projector to any IBM-compatible PC. This section includes instructions for the following: ■ Connecting the computer cable ■ Connecting the mouse cable (if you want to use the remote control as a mouse) ■ Connecting the audio cable (if you’ll be projecting with audio) Follow the steps in each section for the cables you need to connect.
5600 and 7600.book Page 81 Thursday, December 14, 2000 2:46 PM Connecting the Mouse Cable To use the remote control as a mouse, follow the steps below. You’ll use a different mouse cable, depending on whether your computer has a round PS/2 mouse port or a flat USB port. 1. Connect the round end of the mouse cable to the projector’s Mouse port, as shown. note If you have a PC with a serial mouse port, you’ll need a serial mouse cable. See your projector dealer to obtain the correct cable.
5600 and 7600.book Page 82 Thursday, December 14, 2000 2:46 PM Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you’ll need to connect the audio cable. 1. Connect one end of the audio cable to the Audio 1 jack on the projector. Audio 1 jack audio cable 2. Connect the other end of the audio cable to the speaker or audio out port on the computer’s sound card.
5600 and 7600.book Page 83 Thursday, December 14, 2000 2:46 PM Connecting to a Desktop Macintosh You can connect the projector to any desktop Macintosh. This section includes instructions for the following: ■ Connecting the computer cable ■ Connecting the mouse cable (if you want to use your remote control as a mouse) ■ Connecting the audio cable (if you’ll be projecting with audio) Follow the steps in each section for the cables you need to connect.
5600 and 7600.book Page 84 Thursday, December 14, 2000 2:46 PM To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as 16-inch mode. See your Macintosh documentation for instructions. Replace the cover and connect the adapter to the free end of the computer video cable. Then plug the cable (with the adapter) into the video port on your Macintosh. 4. Tighten the screws on the connectors.
5600 and 7600.book Page 85 Thursday, December 14, 2000 2:46 PM 2. Disconnect your Macintosh’s mouse cable. Connect the other end of the projector’s mouse cable to the mouse or USB port on your Macintosh. Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you’ll need to connect the audio cable. 1. Connect one end of the audio cable to the Audio 1 port on the projector. Audio 1 port audio cable 2.
5600 and 7600.book Page 86 Thursday, December 14, 2000 2:46 PM Connecting to a Second Computer To connect a second computer to the projector, you need to use the projector’s Computer 2/Component Video port. You’ll also need an additional VGA (D-sub 15-pin) cable, like the one that came with your projector. You can purchase this from your computer or electronics dealer. Follow these steps: 1. Connect one end of the cable to the computer’s video port. 2.
5600 and 7600.book Page 87 Thursday, December 14, 2000 2:46 PM Connecting to a High-End Workstation There is no across-the-board standard for workstation video output. However, your PowerLite projector is capable of remapping input resolutions up to 1600 × 1200 pixels. Workstations that follow the SXGA standard and use the HD15 (standard VGA) connector won’t need an adapter cable or any special connection device. If your system varies, contact your computer dealer for help in connecting your workstation.
5600 and 7600.book Page 88 Thursday, December 14, 2000 2:46 PM Connecting to a DVI Video Source The projector’s Digital Visual Interface (DVI) receives pictures directly from your computer in digital format. This lets the projector display images of greater clarity than can be achieved using a standard analog VGA connection. To project images in digital video format, follow these steps: 1. Connect the computer’s DVI cable to the projector’s DVI port.
5600 and 7600.book Page 89 Thursday, December 14, 2000 2:46 PM B Notices T his appendix includes safety instructions and other important information about your projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use the projector near water or sources of heat. ■ Use attachments only as recommended. ■ Use the type of power source indicated on the projector.
5600 and 7600.book Page 90 Thursday, December 14, 2000 2:46 PM 90 Notices ■ Do not place the projector where the cord can be walked on. This may result in fraying or damage to the plug. ■ Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners. ■ Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating.
5600 and 7600.book Page 91 Thursday, December 14, 2000 2:46 PM Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: ■ There is an object between the remote control IR emitter and the IR receiver on the projector. ■ Ambient light is too bright. ■ Certain types of fluorescent lighting are used.
5600 and 7600.book Page 92 Thursday, December 14, 2000 2:46 PM Declaration of Conformity According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Telephone: EPSON AMERICA, INC.
5600 and 7600.book Page 93 Thursday, December 14, 2000 2:46 PM FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
5600 and 7600.
5600 and 7600.book Page 95 Thursday, December 14, 2000 2:46 PM C Technical Specifications General Type of display Size of liquid crystal panels Poly-silicon Thin Film Transistor (TFT) Diagonal: 1.3 inches (33.6 mm) Aspect ratio: 4:3 (horizontal:vertical) Resolution 1024 × 768 pixels (PowerLite 7600p) 800 × 600 pixels (PowerLite 5600p) Color reproduction 24 bit, 16.
5600 and 7600.book Page 96 Thursday, December 14, 2000 2:46 PM Projection Lamp Type UHE (Ultra High Efficiency) Power consumption 200 W Lamp life About 1500 hours Part number ELPLP12 Remote Control Range 32.8 feet (10 meters) Batteries Alkaline AA (2) Mouse Compatibility Supports PS/2, USB, serial, and ADB Remote IR Receiver Supports EPSON Remote IR Receiver, 10-foot (3-meter) cable (typically used for rear screen projection) Dimensions Height 6.1 inches (156 mm) Width 11.
5600 and 7600.book Page 97 Thursday, December 14, 2000 2:46 PM Environmental Temperature Operating: 41 to 104 °F (5 to 40 °C) Storage: 14 to 140 °F (–10 to 60 °C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing Safety United States FCC Part 15B Class B UL1950 Rev. 3 Canada DOC ICES003 Class B CSA C22.2 No. 950 Rev.
5600 and 7600.book Page 98 Thursday, December 14, 2000 2:46 PM Mode 98 Technical Specifications Refresh Rate (Hz) Resolution NEC400 56.65 640 × 400 SVGA56 56.25 800 × 600 SVGA60 60.317 800 × 600 SVGA72 72.188 800 × 600 SVGA75 75 800 × 600 SVGA85 85.061 800 × 600 XGA43i 86.958 1024 × 768 XGA60 60.004 1024 × 768 XGA70 70.069 1024 × 768 XGA75 75.029 1024 × 768 XGA85 84.997 1024 × 768 SXGA1—70 70.012 1152 × 864 SXGA1—75 75 1152 × 864 SXGA1—85 84.
5600 and 7600.book Page 99 Thursday, December 14, 2000 2:46 PM Mode Refresh Rate (Hz) Resolution MACLC13 66.62 640 × 480 MAC II 13 66.67 640 × 480 MAC16 74.55 832 × 624 MAC19—60 59.28 1024 × 768 MAC19 74.93 1024 × 768 MAC21 75.062 1152 × 870 HDTV480P (ANSI/SMPTE) 59.94 720 × 483 HDTV480P (ATSC) 59.94 704 × 480 HDTV480I (ANSI/SMPTE) 59.94 720 × 487 HDTV480I (ATSC) 59.94 704 × 480 HDTV720P (SMPTE) 59.94 1280 × 720 HDTV1080P (ANSI/SMPTE) 59.
5600 and 7600.
5600 and 7600.book Page 101 Thursday, December 14, 2000 2:46 PM Computer Video Port Pin Assignments The Computer 1 analog port (VGA) and the Monitor Out port are female video RGB, 15-pin micro-D-style connectors. Here are their pin assignments: Pin no.
5600 and 7600.book Page 102 Thursday, December 14, 2000 2:46 PM Image Size and Projection Distance Use the tables below to estimate how far to place the projector from the screen. Since the size of the image can be changed by rotating the zoom ring, a range of distance is given for each screen size. Note that if you tilt the projector upward by extending the feet or use electronic keystone correction, your image size may vary. Standard Lens Diagonal screen size Distance 30 inches 3.6 to 4.6 feet (1.
5600 and 7600.book Page 103 Thursday, December 14, 2000 2:46 PM Wide Angle Lens (ELPAW01) Diagonal screen size Distance 30 inches 2.49 to 3.35 feet (0.76 to 1.02 meters) 60 inches 5.25 to 6.96 feet (1.60 to 2.12 meters) 100 inches 8.96 to 11.8 feet (2.73 to 3.59 meters) 200 inches 18.1 to 23.8 feet (5.53 to 7.26 meters) 300 inches 27.3 to 35.8 feet (8.31 to 10.
5600 and 7600.
5600 and 7600.
5600 and 7600.
5600 and 7600.
5600 and 7600.
