Parts User Manual

Memo • Once the lens has been attached, gently move it left

and right to ascertain that it is fixed firmly in place.

• Use the long throw attachment lens’s rear cap as the

rear cap for the front lens unit of a standard lens.

• Ensure that both the front and rear lens caps are set

in place when the long throw attachment lens and the

standard lens front lens unit are not being used. Fail-

ure to observe this may result in the lenses getting

scratched.

Memo • Perform the same procedure as explained in [2-1.

Removing the Front Lens Unit from the Standard

Lens] when detaching the long throw attachment lens.

• Perform the same procedure as explained in [2-2.

Attaching the Long Throw Attachment Lens] when

reattaching the standard lens front lens unit.

02_LCL_DTP_E.pm6 01.2.15, 3:03 PMPage 15 Adobe PageMaker 6.0J/PPC