Projector Quick Setup Guide

ManualsBrandsEpson ManualsProjectorPowerLite 410W

Where to get help

Internet support

Visit Epson’s support website at epson.com/support (U.S.) or

epson.ca/support (Canada) and select your product for solutions to

common problems. You can download utilities and documentation, get

FAQs and troubleshooting advice, or e-mail Epson with your questions.

Speak to a support representative

To use the Epson PrivateLine

Support service, call (800) 637-7661

and enter the PIN on the included Epson PrivateLine Support card.

This service is available 6 AM to 6 PM, Pacific Time, Monday through

Friday, for the duration of your warranty period. You may also speak

with a projector support specialist by dialing one of the following

numbers. (Toll or long distance charges may apply.)

U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday

Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday

Days and hours of support are subject to change without notice.

Purchase supplies and accessories

You can purchase screens and other accessories from an Epson

authorized reseller. To find the nearest reseller, call

800-GO-EPSON (800-463-7766). Or you can purchase online at

www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

6 Adjust the image

1 To adjust the image position, stand

behind the projector, then press

the foot release lever and lift the

front of the projector. Release the

lever to lock the foot in position.

2 Rotate the focus ring to sharpen the image.

3 To enlarge the image, press the Wide button, or press the Tele button

to reduce it.

4 If your image looks like or , first make sure the projector

is facing the screen squarely. Then, if necessary, press the or

buttons on the projector’s control panel until the image is corrected.

5 To select the best color mode, press the Color Mode button on the

remote control repeatedly to move through the options.

See your User’s Guide on the CD-ROM for more information about

image adjustments.

7 Install your manuals and

1 Insert the PowerLite projector CD-ROM in your drive. If the installer

doesn’t open automatically, double-click the Epson CD-ROM icon,

then double-click the Epson installer icon.

2 Choose your language, then follow the instructions on the screen

to register.

NOTE

You can also register at www.epson.com/webreg.

3 After you register the projector, click User’s Guide, EMP Monitor

Guide to install the manuals. (If you are using Windows

and you don’t

already have Adobe

Reader,

click Adobe Reader and follow the

on-screen instructions to install it.)

4 When you’re done, click Exit.

To open a manual, double-click the PL 410W User’s Guide or EMP Monitor

Operation Guide icon on your desktop.

5 Plug in and turn on

1 Remove the lens cover.

2 Connect the power cord to

the projector and plug

the other end into an

electrical outlet.

The

power light on the

projector turns orange.

3 Turn on your computer or

video source.

4 Press the

Power button on the projector

or remote control. The projector beeps,

the

power light flashes green, and the

projector lamp comes on in about 5 seconds.

5 Start your video or presentation. If you have connected more

than one video source, use the Source Search button on the

projector or remote control to select the one you want to watch.

NOTE

If your image does not appear on the screen, see the

Troubleshooting section for help.

Turning off the projector

1 If you’re using a computer, shut it down first, while you can

still see the display.

2 Press the

Power button on the projector or remote control.

3 When you see the confirmation message, press the

Power

button again. The

projector beeps twice and the

power

light turns orange.

With Epson’s Instant Off

technology, there’s no cool-down

period. When you’re done, just unplug the projector and it’s

ready to travel.

Troubleshooting

If you see a blank screen

If you see a blank screen or the No signal message after turning on

your computer or video source, check the following:

 Make sure the

Power light on the projector is green and not

flashing and the lens cover is removed.

 Make sure the cables are connected correctly. (See the User’s Guide

for more information.)

 If you’ve connected more than one video source, you may need

to press the Source Search button on the projector or the remote

control to select the one you want to watch. (Allow a few seconds

for the projector to sync up after pressing it.)

If the projector and the notebook don’t display the

same image

If you’re using a Windows notebook:

 Hold down the Fn key and press the function key (such as

or CRT/LCD) that lets you display on an external monitor. On most

systems, the

or CRT/LCD key lets you toggle between the

LCD screen and the projector, or display on both at the same time.



Check your monitor settings to make sure both the LCD screen

and the external monitor port are enabled. From the Control

Panel, open the Display utility. Click the Settings tab, then click

Advanced. The method for adjusting the settings varies by brand;

you may need to click a Monitor tab, then make sure the external

Monitor port is set as your primary display and/or enabled. See

your computer’s documentation or online help for details.

If you’re using a Macintosh

notebook:

1 From the Apple

menu, select System Preferences, then click

Display or Displays.

2 Select VGA Display or Color LCD, click Arrangement or Arrange,

and make sure Mirror Displays is checked.

Epson and Instant Off are registered trademarks and Epson Exceed Your Vision is a registered

logomark of Seiko Epson Corporation. PowerLite is a registered trademark of

Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be

trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Printed in XXXXXX CPD-27195

Color Mode

button

Focus ring