Operation Guide

Create new projector (auto registration) screen
This screen is displayed when you click Automatic Search on the Edit Projector List screen.
1 — Displays the search results.
2 Specify an address Select to enter a range of IP addresses in the Start address and
range and search End address fields.
3 Start address Enter the first IP address in the range of addresses that you want to
search.
4 Search Searches for projectors on the network automatically, or searches
within a range of IP addresses when using the Specify an address
range and search function.
5 Edit This is only available when a projector is selected after performing a
search. Click to edit the information for the selected projector.
6 Cancel Click to close the Create new projector (auto registration) screen
without registering the projector information.
7 End address Enter the last IP address in the range of addresses that you want to
search.
Parent topic: Edit Projector List Screen
Related tasks
Editing a Projector List Automatically
44