Operation Guide

• Select Output audio from the projector on the Audio Output tab on the Set options screen.

• If the volume for the computer is set to the minimum while the projector volume is set to the maximum,

the noise may be mixed. Turn up the computer's volume and turn down the projector's volume.

Parent topic: Solving Problems During Projection

Related references

Set options - Audio Output

Error Messages List

When an error occurs, an error message is displayed on your computer screen. Check for your message

and follow the instructions here to clear the error.

Error Messages when Starting up EasyMP Network Projection

Error Messages when Searching for and Selecting Projectors

Error Messages when Projecting

Parent topic: Solving Problems

Error Messages when Starting up EasyMP Network Projection

Error Messages Remedy

Cannot start this application while USB Display is Close USB Display and then start EasyMP

running. Network Projection.

Do one of the following to close USB Display:

• Windows: Disconnect the USB cable from the

projector.

• Mac OS X: Select Disconnect from the USB

Display icon menu on the menu bar or Dock,

and then remove the USB cable.

Cannot start this application while Quick Wireless Close Quick Wireless Connection and then start

Connection is running. EasyMP Network Projection.

To close Quick Wireless Connection, perform

External Device Removal from the icon on the

task bar to remove the Quick Wireless Connection

USB Key from the computer.