Operation Guide

1. Contact your network administrator and check that DHCP is available under the current network

environment.

Note: If DHCP is not available, write down the following values that are available for your projector.

• IP Address

• Subnet Mask

• Gateway Address

2. Connect the computer to the network.

Note: To set up a network connection, if necessary, see the documentation supplied with your

computer or network adapter.

3. Connect a LAN cable to the projector.

4. Turn on the projector.

5. Press the Menu button on the remote control or the control panel, select the Network menu, and

select Network Configuration.

6. Select Wired LAN.

A screen like one of the following is displayed.

7. Select IP settings as necessary.

• DHCP is available: Set DHCP to On.