Operation Guide

Projecting Image and Movie Files
67
• While projecting still images: Press the Esc button.
• While projecting movies: Press the Esc button. On the screen that is
displayed, select Exit, and then press the Enter button.
q
• JPEG format images can be rotated during projection.s p.62
• You can make the following operations using the remote control while
playing movie files.
Fast-forward: Press the [ ] button
Rewind: Press the [ ] button
Freeze (Pause): Press the [ ] button
Three fast-forward/rewind speeds are available, and the speed changes
each time the button is pressed.
To return to normal playback, press the Enter button.
Audio is not output while fast-forwarding, rewinding, or pausing are in
progress.
Projecting all Image and Movie Files in a Folder in
Sequence (Slideshow)
You can project the image and movie files in a folder in sequence, one at
a time. This function is called Slideshow. Perform the Slideshow by the
following procedure.
q
You can set display conditions, such as projecting repeatedly and adding
display effects while files are being switched.To change movie and image
files automatically when you run Slideshow, set the Screen switching time
in the PC Free Option menu to anything other than No. The default setting
is No.s p.68
Procedure
A Start PC Free.s p.60
The file list screen is displayed.
B Use the [ ][ ][ ][ ] buttons to position the cursor
over the folder for the Slideshow that you want to run and
press Enter.
C Select Slideshow from the file list screen, and then press the
Enter button.
The Slideshow starts and the image and movie files in the folder are
automatically projected in sequence, one at a time.
When the last file is projected, the file list screen is automatically
displayed again.If you set Continuous Play to On from the Option
screen, projection starts again from the beginning when it reaches
the end.s p.68
Just as with a scenario, you can proceed to the next screen, return
to the previous screen, or stop playback during projection of a
Slideshow.s "Operating a Presentation" p.65
q
If the Screen switching time setting on the Option screen is set to No, files
do not change automatically when you start a Slideshow. Press the Enter
button or the Page (Down) button on the Remote Control to continue to
the next file.