Operation Guide

Converting PowerPoint Files to Scenarios

• Effects set for the first slide cannot be converted regardless of the

Conversion Mode.

• When Convert files without playing a slideshow is selected, screen

switching effects cannot be converted.

• Animations for which timer or repeat are set may not be converted

normally. If you cannot convert the Animation correctly, set a longer

standby time to increase the reproducibility.

• Cannot convert when the slide display settings in the PowerPoint file are set

to Slide or when Custom Slide Show is set.

E When the confirmation screen is displayed, check the

content and then click "Convert".

• For Play a slideshow and convert files, it is automatically modified to use

the screen's resolution depending on the projector's resolution (XGA or

WXGA). After conversion, it returns to the previous screen resolution.

• If PowerPoint is running. the conversion process cannot be performed.

Close PowerPoint before starting conversion. Also, do not start PowerPoint

during conversion.

• During conversion, do not modify the display setup such as changing the

resolution or connecting an external monitor. If the display setup is

changed, conversion is canceled.

• If After converting a file, copy it to memory is not selected on the Set

screen, the screens from procedure 6 are not displayed. When the main

screen is displayed, preview a scenario or copy to memory by using the

appropriate buttons on the main screen.