PowerLite® 1750/1760W/1770W/1775W Projector User's Guide
Contents Introduction to Your Projector ................................................................................................................... 9 Projector Features................................................................................................................................ 9 Product Box Contents.................................................................................................................... 10 Additional Components ...........................................
Connecting to External USB Devices ............................................................................................ USB Device Projection.............................................................................................................. Connecting a USB Device or Camera to the Projector.............................................................. Selecting the Connected USB Source ......................................................................................
Remote Control Operation ................................................................................................................. Using the Remote Control as a Wireless Mouse ........................................................................... Using the Remote Control as a Presentation Pointer .................................................................... Selecting an Image Source ..........................................................................................................
Projector Identification System for Multiple Projector Control........................................................... Setting the Projector ID................................................................................................................ Setting the Remote Control ID..................................................................................................... Matching Multiple-Projector Display Quality ..............................................................................
Solutions When "No Signal" Message Appears........................................................................... Displaying From a PC Laptop ................................................................................................. Displaying From a Mac Laptop ............................................................................................... Solutions When "Not Supported" Message Appears ...................................................................
Introduction to Your Projector Refer to these sections to learn more about your projector and this manual.
Product Box Contents Additional Components Optional Equipment and Replacement Parts Registration and Warranty Information Parent topic: Introduction to Your Projector Related concepts Projector Parts Locations Product Box Contents Save all the packaging in case you need to ship the projector. Always use the original packaging (or equivalent) when shipping.
1 Projector 2 Remote control 3 Remote control batteries (two AA alkaline) 4 Power cord 5 VGA computer cable 6 USB cable 7 Audio adapter cable 8 Carrying case 11
9 Wireless LAN module (PowerLite 1775W) 10 Epson Quick Wireless USB Connection Key (PowerLite 1775W) 11 Password Protected sticker 12 Projector documentation CD 13 Projector software CD Parent topic: Projector Features Additional Components Depending on how you plan to use the projector, you may need to obtain the following additional components: • To receive a component video signal, you need a D-sub, 15-pin, component-to-VGA video cable.
Option or part Part number Epson DC-11 document camera V12H377020 Epson DC-10s document camera ELPDC10S Epson DC-06 document camera V12H321001 BrightLink Solo interactive module (IU-01) V12H415020 Kensington security lock ELPSL01 Accolade Duet portable projector screen ELPSC80 ES3000 Ultra Portable Projection screen V12H002S3Y 60-inch portable pop-up screen (4:3 aspect ratio) V12H002S27 80-inch portable pop-up screen (4:3 aspect ratio) V12H002S28 Component-to-VGA video cable V12H005C19
Notations Used in the Documentation Follow the guidelines in these notations as you read your documentation: • Warnings must be followed carefully to avoid bodily injury. • Cautions must be observed to avoid damage to your equipment. • Notes contain important information about your projector. • Tips contain additional projection information.
Projector Parts - Base Projector Parts - Control Panel Projector Parts - Remote Control Parent topic: Introduction to Your Projector Projector Parts - Front/Top 1 Exhaust vent 2 Wireless LAN module indicator light (PowerLite 1760W/1770W/1775W) 3 Wireless LAN module cover (PowerLite 1760W/1770W/1775W) 4 A/V Mute slide lever 5 Foot release lever 6 Front adjustable foot 7 A/V Mute slide (lens cover) 8 Remote receiver 9 Projection distance/shape sensor (PowerLite 1775W) 15
10 Air intake vent (air filter) 11 Speaker 12 Projector status lights 13 Zoom ring 14 Focus ring (PowerLite 1750/1760W/1770W) 15 Control panel 16 Lamp cover Parent topic: Projector Parts Locations Projector Parts - Rear 1 A/C input port 2 Video port 3 Computer port 4 USB TypeB port 5 USB TypeA port 6 HDMI port (PowerLite 1760W/1770W/1775W) 7 Audio port 8 Remote receiver 9 Lamp cover screw 10 Security lock port Parent topic: Projector Parts Locations 16
Projector Parts - Base 1 Mounting bracket holes 2 Rear feet 3 Front adjustable foot 4 Wireless LAN module screw (PowerLite 1760W/1770W/1775W) Parent topic: Projector Parts Locations 17
Projector Parts - Control Panel 1 Power button and light 2 Screen Fit button (PowerLite 1775W; adjusts projected images) 3 Source Search button (searches for connected video sources) 4 Enter button (selects options) 5 Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons 6 Help button (accesses projector help information) 7 Esc button (cancels/exits functions) 8 Horizontal keystone adjustment buttons (adjust screen shape) and arrow buttons 9 Menu button (accesses pro
Projector Parts - Remote Control 1 Power button 2 Computer button (selects connected computer source) 3 Video button (cycles through connected video sources) 4 Screen Fit button (adjusts image shape; functions only on PowerLite 1775W and when not projecting from the ceiling) 5 Numeric buttons (enter numbers) 6 A/V Mute button (turns off picture and sound) 19
7 Freeze button (stops video action) 8 Auto button (automatically adjusts position, tracking, and sync settings) 9 Aspect button (selects the image aspect ratio) 10 Page Up/Down buttons (control presentation slides) 11 E-Zoom +/– buttons (zoom into and out of the image) 12 Menu button (accesses projector menu system) 13 Arrow buttons (move through on-screen options and control wireless mouse functions) 14 Enter button (selects options and controls wireless mouse functions) 15 Esc button (ca
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Opening the Lens Cover Projector Placement You can place the projector on almost any flat surface to project your presentation. You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Front Rear Ceiling 22
Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system. Parent topic: Projector Placement Related references Projector Setup Settings - Extended Menu Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image.
PowerLite 1760W/1770W/1775W 4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 28 inches (71 cm) 28 to 33 inches –1.5 inches (–4 cm) (71 to 85 cm) 30 inches (76.2 cm) 30 to 36 inches (76 to 91 cm) 24 –1.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 40 inches (101.6 cm) 40 to 48 inches –2.2 inches (–6 cm) (102 to 122 cm) 50 inches (127 cm) 50 to 60 inches –2.7 inches (–7 cm) (127 to 153 cm) 60 inches (152.4 cm) 60 to 72 inches –3.3 inches (–8 cm) (153 to 184 cm) 80 inches (203.2 cm) 81 to 97 inches –4.4 inches (–11 cm) (205 to 246 cm) 100 inches (254 cm) 101 to 121 inches –5.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 40 inches (101.6 cm) 36 to 44 inches –0.9 inch (–2 cm) (92 to 111 cm) 50 inches (127 cm) 45 to 55 inches –1.1 inches (–3 cm) (115 to 139 cm) 60 inches (152.4 cm) 55 to 66 inches –1.3 inches (–3 cm) (139 to 167 cm) 70 inches (177.8 cm) 64 to 77 inches –1.6 inches (–4 cm) (162 to 195 cm) 80 inches (203.2 cm) 73 to 88 inches –1.8 inches (–5 cm) (186 to 223 cm) 100 inches (254 cm) 91 to 110 inches –2.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 30 inches (76.2 cm) 26 to 32 inches –1.4 inches (–4 cm) (67 to 80 cm) 40 inches (101.6 cm) 35 to 42 inches –1.9 inches (–5 cm) (89 to 108 cm) 50 inches (127 cm) 44 to 53 inches –2.4 inches (–6 cm) (112 to 135 cm) 60 inches (152.4 cm) 53 to 64 inches –2.9 inches (–7 cm) (135 to 162 cm) 80 inches (203.2 cm) 71 to 85 inches –3.9 inches (–10 cm) (181 to 217 cm) 100 inches (254 cm) 89 to 107 inches –4.
PowerLite 1750 4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 30 inches (76.2 cm) 28 to 34 inches –2 inches (–5 cm) (72 to 86 cm) 40 inches (101.6 cm) 38 to 45 inches –2.7 inches (–7 cm) (96 to 116 cm) 50 inches (127 cm) 47 to 57 inches (120 to 145 cm) 28 –3.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 60 inches (152.4 cm) 57 to 69 inches –4.1 inches (–10 cm) (145 to 174 cm) 80 inches (203.2 cm) 76 to 92 inches –5.4 inches (–14 cm) (194 to 233 cm) 100 inches (254 cm) 95 to 115 inches –6.8 inches (–17 cm) (242 to 291 cm) 150 inches (381 cm) 143 to 172 inches –10.1 inches (–26 cm) (364 to 438 cm) 200 inches (508 cm) 192 to 230 inches –13.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 60 inches (152.4 cm) 62 to 75 inches 0.5 inch (1 cm) (158 to 190 cm) 70 inches (177.8 cm) 73 to 87 inches 0.6 inch (1 cm) (185 to 222 cm) 80 inches (203.2 cm) 83 to 100 inches 0.6 inch (2 cm) (211 to 254 cm) 100 inches (254 cm) 104 to 125 inches 0.8 inch (2 cm) (264 to 317 cm) 150 inches (381 cm) 156 to 188 inches 1.2 inches (3 cm) (397 to 477 cm) 200 inches (508 cm) 209 to 250 inches 1.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 40 inches (101.6 cm) 40 to 48 inches –0.7 inch (–2 cm) (102 to 123 cm) 50 inches (127 cm) 50 to 60 inches –0.9 inch (–2 cm) (128 to 154 cm) 60 inches (152.4 cm) 60 to 73 inches –1.1 inches (–3 cm) (154 to 185 cm) 80 inches (203.2 cm) 81 to 97 inches –1.5 inches (–4 cm) (205 to 247 cm) 100 inches (254 cm) 101 to 122 inches –1.9 inches (–5 cm) (257 to 309 cm) 150 inches (381 cm) 152 to 183 inches –2.
• If your presentation or video includes sound, you can connect audio input cables, if necessary. • For presentations or slide shows without a computer, you can connect USB devices (such as a flash drive or camera) or an optional document camera. Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly.
• Mac OS X 10.6.x Connect the projector to your computer using a USB cable. Note: The computer display resolution must be between 640 × 480 and 1600 × 1200 (Windows) or 1680 × 1200 (Macintosh) to project using USB. You cannot use the remote control's wireless mouse function when you use your projector's USB Type B port for presentation display. 1. In the projector's Extended menu, set the USB Type B setting to USB Display. 2. Turn on your computer. 3. Connect the cable to your projector's USB TypeB port. 4.
Related references Projector Setup Settings - Extended Menu Connecting to a Computer for VGA Video You can connect the projector to your computer using a VGA computer cable. Note: To connect a Macintosh that includes only a Mini DisplayPort or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port. Contact Apple for compatible adapter options. 1. If necessary, disconnect your computer's monitor cable. 2.
3. Connect the other end to the projector's HDMI port. 1 HDMI port Parent topic: Connecting to Computer Sources Connecting to a Computer for USB Mouse Control If you connected your computer to a Computer or HDMI port on the projector, you can set up the remote control to act as a wireless mouse. This lets you control computer presentations at a distance from your computer. To do this, connect the projector to your computer using a USB cable.
Related references Projector Setup Settings - Extended Menu Projector Parts - Remote Control Connecting to a Computer for Sound If your computer presentation includes sound and you did not connect it using the projector's USB TypeB or HDMI port, you can still play sound through the projector's speaker system. Just connect an optional 3.5 mm stereo mini-jack audio cable as described here. 1. Connect the audio cable to your laptop's headphone or audio-out jack, or your desktop's speaker or audio-out port. 2.
3. Connect the other end to the projector's HDMI port. 1 HDMI port Parent topic: Connecting to Video Sources Connecting to a Component-to-VGA Video Source If your video source has component video ports, you can connect it to the projector using a component-to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 1. Make sure the projector and your video source are turned off. 2.
Related references Input Signal Settings - Signal Menu Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using an optional RCA-style video or A/V cable. 1. Make sure the projector and your video source are turned off. 2. Connect the cable with the yellow connector to your video source's yellow video output port. 3. Connect the other end to the projector's Video port.
2. Connect the other end of the cable to the projector's Audio port. 1 Audio port Parent topic: Connecting to Video Sources Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector.
Parent topic: Connecting to External USB Devices Related topics Projecting a Slide Show Connecting a USB Device or Camera to the Projector You can connect your USB device or camera to the projector's USB Type A port and use it to project a slide show or presentation. 1. If your USB device came with a power adapter, plug the device into an electrical outlet. 2. Connect the USB cable (or USB flash drive or USB memory card reader) into the projector's USB TypeA port shown below.
2. Press the USB button on the remote control. 3. Press the button again to cycle through other USB sources, if available. Parent topic: Connecting to External USB Devices Disconnecting a USB Device or Camera From the Projector When you finish presenting with a connected USB device or camera, you must prepare to disconnect the device from the projector. 1. Select Exit from any software running your slide show or presentation from the device. 2. Disconnect the USB device or camera from the projector. 3.
Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. 1. Open the battery cover as shown. 2. Insert the batteries with the + and – ends facing as shown.
3. Close the battery cover and press it down until it clicks into place. Parent topic: Setting Up the Projector Opening the Lens Cover 1. To open the projector's lens cover, slide the A/V Mute slide lever.
2. To cover the lens or temporarily turn off the projected picture and sound, slide the A/V Mute slide cover closed.
Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wireless Network Projection Setting Up Projector Network E-Mail Alerts Setting Up Monitoring Using SNMP Controlling a Networked Projector Using a Web Browser Wireless Network Projection You can send images to your PowerLite 1760W/1770W/1775W projector through a wireless network. To do this, you must install the optional Epson 802.
Related references Optional Equipment and Replacement Parts Installing the Wireless LAN Module To use the PowerLite 1760W/1770W/1775W over a wireless network, install the Epson 802.11g/b/n wireless module in the projector. Do not install any other type of wireless module. Caution: Never remove the module while its indicator light is green or flashing, or while you are projecting wirelessly. You may damage the module or lose data. 1. Turn off the projector and unplug the power cord. 2.
3. Remove the wireless LAN module cover. 4. Insert the wireless LAN module into the port.
5. Replace the cover and secure it using the screw you removed. 6. Plug in and turn on the projector. Parent topic: Wireless Network Projection Using Quick Wireless Connection (Windows Only) You can use the optional Epson Quick Wireless Connection USB key to quickly connect the projector to a Windows computer wirelessly. Then you can project your presentation and remove the key when you are done. 1. Turn on the projector. 2. Connect the USB key to the projector's USB TypeA port.
4. Now connect the USB key to a USB port on your computer or notebook. Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchU3.exe, then select Allow on the next screen. 5. Follow the on-screen instructions to install the Quick Wireless Connection driver. Note: If you see a Windows Firewall message, click Yes to disable the firewall. After a few minutes, your computer image is displayed by the projector.
3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter. 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network.
• PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the PJLink protocol for projector control. • Web Control Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web. • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it.
Wireless LAN Menu Settings Note: See your projector's EasyMP Network Projection Operation Guide for details on selecting these settings.
Setting Options Description IP Settings DHCP (On or Off) Selects DHCP if your network assigns addresses automatically, or turns off DHCP so you can enter the network's IP address, subnet mask, and gateway address as needed IP Address Subnet Mask Gateway Address SSID Display On Selects whether to display the SSID on the network standby screen Off IP Address Display On Selects whether to display the IP address on the network standby screen Off Parent topic: Selecting Wireless Network Settings Manu
Parent topic: Wireless Network Projection Setting Up Wireless Network Security You can set up security for your projector to use on the wireless network (PowerLite 1760W/1770W/1775W). Set up one of the following security options to match the settings used on your network: • WEP encryption • WPA security Note: Check with your network administrator for guidance on entering the correct information. 1. Press the Menu button on the remote control. 2. Select the Network menu and press Enter. 3.
Parent topic: Wireless Network Projection Wireless Security Menu Settings Settings on the Security menu let you select the type of security and security settings that match the network you are connecting the projector to.
Parent topic: Setting Up Wireless Network Security Setting Up Projector Network E-Mail Alerts You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector. 1. Press the Menu button on the remote control. 2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter. 4. Select the Mail menu and press Enter. 5. Turn on Mail Notification. 6. Enter the IP address for the SMTP Server option.
8. Choose an Address field, enter the e-mail address, and select the alerts you want to receive there. Repeat for up to three addresses. Note: Your e-mail address can be up to 32 alphanumeric characters long. 9. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Note: If a critical problem causes the projector to shut down, you may not receive an e-mail alert.
4. Select the Others menu and press Enter. 5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 6. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to allow the projector to be detected. 7.
2. Start your web browser on a computer connected to the network. 3. Type the projector's IP address into the browser's address box and press the computer's Enter key. You see the Web Control screen. 4. To select projector menu settings, select the name of the menu and follow the on-screen instructions to select settings. 5. To control the projection remotely, select the Web Remote option.
10 Volume button controls 6. Select the icon corresponding to the projector function you want to control.
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features.
1. Open the projector's lens cover. 2. Connect the power cord to the projector's power inlet.
3. Plug the power cord into an electrical outlet. The projector's power light turns orange. This indicates that the projector is receiving power, but is not yet turned on. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 4. Press the power button on the projector or the remote control to turn on the projector. The projector beeps and the power light flashes green as the projector warms up. After about five seconds, the power light stops flashing and turns green.
The projector displays a shutdown confirmation screen. 2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the power light turns orange. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away. 3. To transport or store the projector, make sure the power light is orange (but not flashing), then unplug the power cord.
Caution: To avoid damaging the projector or lamp, never unplug the power cord when the power light is green or flashing orange. 4. Close the projector's lens cover. Parent topic: Using Basic Projector Features Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. The default language setting is English. 1. Turn on the projector. 2. Press the Menu button.
3. Press the down arrow button to select the Extended menu and press Enter. Note: The Network menu does not appear on non-network projector models. 4. Press the down arrow button to select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu to exit the menus.
2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector. The foot extends from the projector. 3. Release the lever to lock the foot. 4. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape.
Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off to the side, you may need to correct the image shape for the best display quality. When you turn on automatic keystone correction in your projector's Settings menu, your projector automatically corrects keystone effects when you reposition the projector.
1. Press the Screen Fit button on the projector or remote control. You see a message on the screen. 2. Move the projector as necessary to display the message in the middle of the screen. 3. Zoom into the image until its white frame extends beyond the edges of the screen. 4. Press the Screen Fit button again.
Two displays flash briefly, then this message appears: 5. Fine-tune the image shape as necessary using the arrow buttons on the control panel. 6. When you are finished, press Esc. Now, if necessary, you can correct the image corners individually using Quick Corner by pressing the arrow buttons on the control panel.
5. Select the Quick Corner setting and press Enter. You see the Quick Corner adjustment screen. 6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter. 7. Press the arrow buttons to adjust the image shape as necessary. 8. When you are finished, press Esc.
2. Press a keystone button on the projector's control panel. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape using the Keystone settings in the projector menus. Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Resizing the Image With the Zoom Ring 1. Turn on the projector and display an image.
2. To enlarge or reduce the image size, rotate the projector's zoom ring. 1 PowerLite 1775W 2 PowerLite 1750/1760W/1770W Parent topic: Using Basic Projector Features Focusing the Image Before you sharpen the focus, turn on the projector and display an image. • PowerLite 1775W: Press the Focus buttons on the projector or remote control. • PowerLite 1750/1760W/1770W: Rotate the projector’s focus ring.
1 PowerLite 1775W 2 PowerLite 1750/1760W/1770W Parent topic: Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m) away. You can point it at the screen, or the front or back of the projector. Make sure that you aim the remote control at the projector's receivers within the angles listed below. 1 19.
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.
• To move the cursor on the screen, use the arrow buttons. • To left-click, press the Enter button once (press it twice to double-click). • To right-click, press the Esc button. • To drag-and-drop, hold the Enter button as you move the cursor with the arrow buttons, then release Enter at the destination.
2. Use the arrow buttons on the remote control to move the pointer on the screen. 3. Press Esc to clear the pointer from the screen. Parent topic: Remote Control Operation Related references Projector Feature Settings - Settings Menu Selecting an Image Source If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other. 1. Make sure the connected image source you want to use is turned on. 2.
3. Do one of the following: • Press the Source Search button on the projector or remote control until you see the image from the source you want.
• Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to select the other source. 1 Computer port source 2 Video and HDMI sources 3 USB port sources (computer display and external devices) 4 Network source 4. If you see a blank screen or a "No Signal" message, try the following: • Check that the device cables are securely connected to the projector and the device.
• Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and the rear. You can change the projection mode using the remote control or by changing a menu setting. Changing the Projection Mode Using the Remote Control Changing the Projection Mode Using the Menus Parent topic: Using Basic Projector Features Changing the Projection Mode Using the Remote Control You can change the projection mode to flip the image over top-to-bottom. 1.
3. Select the Extended menu and press Enter. 4. Select the Projection setting and press Enter. 5. Select a projection mode and press Enter. 6. Press Menu to exit. Parent topic: Projection Modes Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the input signal from your video source determines the image's aspect ratio.
1. Turn on the projector and switch to the image source you want to use. 2. Press the Aspect button on the remote control. The shape and size of the displayed image changes, and the name of the aspect ratio appears briefly on the screen. 3. To cycle through the available aspect ratios for your input signal, press the Aspect button repeatedly.
PowerLite 1760W/1770W/1775W Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input signal. Normal Displays images using the full projection area and maintains the aspect ratio of the image. 16:9 Converts the aspect ratio of the image to 16:9. Full Displays images using the full width of the projection area, but does not maintain the aspect ratio. Zoom Displays images using the full width of the projection area and maintains the aspect ratio of the image.
1. Turn on the projector and switch to the image source you want to use. 2. If you are projecting from a DVD player or other video source, insert a disc or other video media and press the Play button, if necessary. 3. Press the Color Mode button on the remote control to change the Color Mode. The image quality changes and the name of the Color Mode appears briefly on the screen. 4. To cycle through all the available Color Modes for your input signal, press the Color Mode button repeatedly.
Color Mode Description Whiteboard Best for presentations onto a whiteboard (adjusts the colors accordingly) Photo Best for still images projected in a bright room Customized Best for customizing a color mode using manual Color Adjustment settings in the Image menu.
Parent topic: Color Mode Controlling the Volume With the Volume Buttons You can use the Volume buttons on the remote control to adjust the volume as you project a presentation with audio. The volume buttons control the projector’s internal speaker system. You must adjust the volume separately for each connected input source. 1. Turn on the projector and start a presentation that includes audio. 2. Press the Volume buttons as necessary to lower or raise the volume. A volume gauge appears on the screen. 3.
• Present a slide show of all images in a folder • Project PowerPoint presentations converted to "scenario" files using the EasyMP Slide Converter program included with your projector Note: For instructions on converting PowerPoint files to the necessary scenario file format, see the EasyMP Slide Converter Operation Guide on your projector CD. Parent topic: Projecting a Slide Show Supported Slideshow File Types You can project these types of files using the projector's Slideshow feature.
Starting a Slide Show or Presentation After connecting a USB device to the projector, you can switch to the USB input source and start your slide show or presentation. Note: You can change the Slideshow operation options or add special effects by highlighting Option at the bottom of the screen and pressing Enter. 1. Press the USB button on the projector remote control. The Slideshow screen appears. 2.
• To move back up a folder level on your device, highlight Back to Top and press Enter. • To view additional images in a folder, highlight Next page or Previous page and press Enter. • To switch screens in a presentation, press the Page Up or Page Down button (for FSE files), or the left or right arrow button on the remote control and press Enter (for SIT files). Note: To switch screens in FSE file animations, press the left or right arrow button and press Enter. 5.
Option Available settings Description Sort Order In Ascending Sorts files in first-to-last order In Descending Sorts files in last-to-first order On Displays a slide show continuously Off Displays a slide show one time through Screen switching time No Does not display the next file automatically 1Sec. to 60Sec.
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of Images Projector Security Features Projector Identification System for Multiple Projector Control Shutting Off the Picture and Sound Temporarily You can temporarily turn off the projected picture and sound if you want to redirect your audience's attention during a presentation.
Related references Projector Setup Settings - Extended Menu Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it. 1. Press the Freeze button on the remote control to stop the video action. 2. To restart the video action in progress, press Freeze again.
1. Press the E-Zoom + button on the remote control. You see a crosshair on the screen indicating the center of the zoom area. 2. Use the following buttons on the remote control to adjust the zoomed image: • Use the arrow buttons to position the crosshair in the image area you want to zoom into. • Press the E-Zoom + button repeatedly to zoom into the image area, enlarging it up to four times. • To pan around the zoomed image area, use the arrow buttons.
Installing a Security Cable Parent topic: Adjusting Projector Features Password Security Types You can set up these types of password security using one shared password: • Power On Protect password prevents anyone from using the projector without first entering a password. • User's Logo Protect password prevents anyone from changing the custom screen the projector can display when it turns on or when you use the A/V Mute feature.
You see the prompt "Change the password?". 3. Select Yes and press Enter. 4. Hold down the Num button on the remote control and use the numeric buttons to set a four-digit password. The password displays as **** as you enter it. Then you see the confirmation prompt. 5. Enter the password again. You see the message "Password accepted." 6. Press Esc to return to the Password Protect menu. 7. Make a note of the password and keep it in a safe place in case you forget it.
If you do not see this menu, hold down the Freeze button on the remote control for five seconds until the menu appears. 1. To prevent unauthorized use of the projector, select Power On Protect, press Enter, select On, and press Esc. 2. To prevent changes to the User's Logo screen or related display settings, select User's Logo Protect, press Enter, select On, and press Esc. 3. To prevent changes to network settings, select Network Protect, press Enter, select On, and press Esc.
1. Hold down the Num button on the remote control while you enter the password using the numeric buttons. The password screen closes. 2. If the password is incorrect, the following may happen: • You see a "wrong password" message and a prompt to try again. Enter the correct password to proceed. • If the password is incorrect three times, you see a message that the projector is locked and a request code.
1. Display the image you want to project as the User's Logo from a connected computer or video source. 2. Press the Menu button, select the Extended menu, and press Enter. 3. Select the User's Logo setting and press Enter. You see a prompt asking if you want to use the displayed image as a user's logo. 4. Select Yes and press Enter. You see a selection box overlaying your image. 5. Use the arrow buttons on the remote control to surround the image area you want to use as the User's Logo and press Enter.
You see the User's Logo zoom factor menu. 7. Select a zoom percentage and press Enter. You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter. Note: It takes a few moments for the projector to save the image; do not use the projector, its remote control, or any connected equipment until it is finished. You see a completion message. 9. Press Esc to exit the message screen. 10. Select the Extended menu and press Enter. 11. Select Display and press Enter. 12.
Locking the Projector's Buttons You can lock the buttons on the projector's control panel to prevent anyone from using the projector. You can lock all the buttons or all the buttons except the power button. 1. Press the Menu button. 2. Select the Settings menu and press Enter. 3. Select the Control Panel Lock setting and press Enter. 4. Select one of these lock types and press Enter: • To lock all of the projector's buttons, select Full Lock.
Installing a Security Cable You can use the security slot on the back of the projector to attach a Kensington Microsaver Security system, available from Epson. 1 Security lock port Parent topic: Projector Security Features Projector Identification System for Multiple Projector Control You can operate multiple projectors using one remote control for more elaborate presentations. To do this, you assign an identification number to each projector and to the remote control.
3. Select Projector ID and press Enter. 4. Use the arrow buttons on the remote control to select the identification number you want to use for the projector. Then press Enter. Repeat these steps for all the other projectors you want to operate from one remote control. Parent topic: Projector Identification System for Multiple Projector Control Setting the Remote Control ID The remote control's ID is set to zero by default so it can operate any compatible projector.
4. Hold down the ID button on the remote control while you press the numeric button that matches the projector's ID. Then release the buttons. 5. Press the ID button on the remote control to check if the ID-setting process worked. You see a message displayed by the projector. • If the remote control is listed as On, the remote control ID is set to operate only the listed projector. • If the remote control is listed as Off, the remote control ID is not set properly.
5. Press the Menu button, select the Extended menu, and press Enter. 6. Select the Multi-screen setting and press Enter. 7. Set the Adjustment Level setting to 1 and press Enter. 8. Set the remote control ID to match the second projector. 9. Access the Extended menu Multi-screen setting on the second projector and set the Adjustment Level setting to 1. 10. Adjust the Brightness Correct. setting on the projector with the darkest display so it matches the lighter display, and press Enter.
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Note: The Network menu does not appear on non-network projector models.
1. Press the Menu button on the control panel or remote control. You see the menu screen displaying the Image menu settings.
2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter. 4. Press the up or down arrow button to move through the settings. 5. Change the settings using the buttons listed on the bottom of the menu screens. 6. To return all the menu settings to their default values, select Reset. 7.
To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description Color Adjustment Slider bars for each color Adjusts the intensity of red, green, and blue hues in the image; for Customized Color Mode, also adjusts cyan, magenta, and yellow hues and saturation Auto Iris On Adjusts the projected luminance based on the image brightness when certain Color Modes are selected Off Note: The Brightness setting does not affect lamp brightness. To change the lamp brightness mode, use the Power Consumption setting.
Component video input source Composite video input source HDMI input source (PowerLite 1760W/1770W/1775W) 110
Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the Auto button on the remote control. To change settings for an input source, make sure the source is connected and select that source. Setting Options Description Auto Setup On Automatically optimizes computer image quality (when On) Off Resolution Auto Normal Sets the input signal resolution if not detected automatically using the Auto option.
Setting Options Description Position Up, down, left, right Adjusts the image location on the screen Progressive Video Sets whether to convert interlaced-to-progressive signals for certain video image types Film/Auto Off: for fast-moving video images Off Video: for most video images Film/Auto: for movies, computer graphics, and animation Noise Reduction Off Reduces flickering in analog images in two levels NR1 NR2 HDMI Video Range Normal (PowerLite 1760W/1770W/1775W) Expanded Input Signal
Setting Options Description Aspect See the list of available aspect ratios Sets the aspect ratio (width-to-height ratio) for the selected input source Overscan Auto Changes the projected image ratio to make the edges visible by a selectable percentage or automatically Off 4% 8% Parent topic: Adjusting the Menu Settings Related references Available Image Aspect Ratios Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features.
Setting Options Description Keystone H/V Keystone Adjusts image shape to rectangular (horizontally and vertically) Quick Corner H/V Keystone: lets you manually correct horizontal and vertical sides, or turn automatic correction on or off Quick Corner: select to correct image shape and alignment using an on-screen display Control Panel Lock Full Lock Partial Lock Controls projector button locking to secure the projector Full Lock: locks all buttons Off Partial Lock: locks all buttons except the po
Setting Options Description User Button Power Consumption Assigns a menu option to the User button on the remote control for one-touch access Info Progressive Closed Caption Test Pattern Multi-screen Resolution Test Pattern On Displays a test pattern to assist in focusing and zooming the image and correcting image shape (press Esc to cancel pattern display) Off Parent topic: Adjusting the Menu Settings Related tasks Correcting Image Shape With Quick Corner Projector Setup Settings - Extended Menu
Setting Options Description Display Messages Selects various display options Display Background Messages: controls whether messages are displayed on the screen Startup Screen A/V Mute Display Background: selects the screen color or logo to display when no signal is received Startup Screen: controls whether a special screen appears when the projector starts up A/V Mute: selects the screen color or logo to display when A/V Mute is turned on Closed Caption Off Controls use of closed captions and se
Setting Options Description Operation Direct Power On Selects various operation options Sleep Mode Direct Power On: lets you turn on the projector without pressing the power button Sleep Mode Timer Lens Cover Timer High Altitude Mode Sleep Mode: automatically turns off the projector after an interval of inactivity Sleep Mode Timer: sets the interval for Sleep Mode Lens Cover Timer: automatically turns off the projector after 30 minutes if the lens cover is closed High Altitude Mode: regulates the p
Setting Options Description Multi-screen Adjustment Level (1 to 9) Matches display qualities and colors of multiple projectors Brightness Correct. Color Correct.
Setting Options Description Net.
Video input source USB or LAN input source 120
Note: The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours. Available settings depend on the current input source.
Information item Description Event ID Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes (PowerLite 1760W/1770W/1775W) Event ID Code List Parent topic: Adjusting the Menu Settings Related references Optional Equipment and Replacement Parts Projector Lamp Specifications Event ID Code List If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the c
Event ID code Cause and solution 0891 Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. 0892 The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct. 0893 The WEP/TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct. 0894 Communication with unauthorized access point was disconnected. Contact your network administrator.
You cannot reset the following settings using the Reset All option: • Input Signal • User's Logo • Language • Network menu items • Lamp Hours • Password • User Button • Multi-screen Parent topic: Adjusting the Menu Settings 124
Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation.
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Caution: Do not use glass cleaner to clean the lens, or you may damage it. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface.
2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush). Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it. 3. If dust is difficult to remove or the air filter is damaged, replace the air filter.
2. Grasp the tab at the center of the air filter and pull it out of the projector. Note: Air filters contain polycarbonate, ABS resin, and polyurethane foam. Dispose of used air filters according to local regulations.
3. Place the new air filter in the projector as shown and push gently until it clicks into place. Parent topic: Air Filter and Vent Maintenance Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system.
Projector Lamp Specifications Optional Equipment and Replacement Parts Replacing the Lamp Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot. Warning: Let the lamp fully cool before replacing it to avoid injury. You can replace the lamp while the projector is mounted to the ceiling, if necessary. 1. Turn off the projector and unplug the power cord. 2. Allow the projector lamp to cool down for at least one hour. 3.
4. Slide the lamp cover out and lift it off. 5. Lift up the metal bar securing the lamp.
6. Lift up the lamp handle and gently pull the lamp out of the projector. Caution: Lift the lamp handle carefully to avoid damaging the handle as you pull out the lamp. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Press down on the area shown to secure the lamp in place. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure. 8. Press the metal bar down over the lamp until it clicks into place on both sides.
9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage. Parent topic: Projector Lamp Maintenance Related tasks Resetting the Lamp Timer Resetting the Lamp Timer You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly.
3. Select the Reset menu and press Enter. 4. Select Reset Lamp Hours and press Enter. You see a prompt asking if you want to reset the lamp hours. 5. Select Yes and press Enter. Parent topic: Projector Lamp Maintenance Related tasks Replacing the Lamp Replacing the Remote Control Batteries The remote control uses the two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual.
1. Open the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3. Insert the batteries with the + and – ends facing as shown.
4. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Projector Maintenance Related references Remote Control Operation Transporting the Projector The projector contains precision parts, some of which are glass.
Note: Epson shall not be liable for any damages incurred during transportation.
Solving Problems Check the solutions in these sections if you have any problems using the projector. Projection Problem Tips Projector Light Status Using the Projector Help Displays Solving Image or Sound Problems Solving Projector or Remote Control Operation Problems Solutions When Network Alert E-Mails are Not Received Where to Get Help Projection Problem Tips If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it on.
1 Power light 2 Lamp light 3 Temperature light Power light Lamp light Temperature light Status and solution Green Off Off Normal operation. Flashing green Off Off Warming up. Wait for an image to appear. Orange Off Off Standby or sleep mode. Flashing orange Off Off Preparing network monitoring or shutting down. (Wait for the light to remain orange before unplugging the projector.) Flashing red Flashing orange Projector is too hot.
Power light Lamp light Temperature light Status and solution Red Flashing red Off Lamp has a problem. • Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help.
Using the Projector Help Displays You can display information to help you solve common problems using the projector's Help system. 1. Turn on the projector. 2. Press the Help button on the projector or the remote control. You see the Help menu. 3. Use the up and down arrow buttons to highlight the problem you want to solve. 4. Press Enter to view the solutions. 5. When you are finished, do one of the following: • To select another problem to solve, press Esc. • To exit the help system, press Help.
• Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources. • Press the projector's power button to wake it from standby or sleep mode. Also see if your connected computer is in sleep mode or displaying a blank screen saver. • If you unplugged the projector and plugged it right back in, press the power button to turn on the projector (with Direct Power On enabled).
Parent topic: Solving Image or Sound Problems Related references Projector Setup Settings - Extended Menu Solutions When "No Signal" Message Appears If the "No Signal" message appears, try the following solutions: • Press the Source Search button and wait a few seconds for an image to appear. • Turn on the connected computer or video source, and press Play to begin your presentation, if necessary. • Check the connection from the projector to your video sources.
3. Do one of the following: • Mac OS X 10.6.x: Click Show displays in menu bar. • Other Mac OS X versions: Select the VGA Display or Color LCD option, click the Arrange or Arrangement tab, and check the Mirror Displays checkbox. (See your laptop manual for details.) Parent topic: Solutions When "No Signal" Message Appears Solutions When "Not Supported" Message Appears If the "Not Supported" message appears, try the following solutions: • Make sure the correct input signal is selected on the Signal menu.
Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible. • If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust the image shape. • Turn on automatic keystone adjustments using the projector's menus.
• If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality. • If you connected an extension cable, try projecting without it to see if it caused interference in the signal.
Image Quality Settings - Image Menu Projection Distance Related tasks Automatically Correcting Image Shape With Screen Fit Focusing the Image Cleaning the Lens Solutions When the Image Brightness or Colors are Incorrect If the projected image is too dark or light, or the colors are incorrect, try the following solutions: • Press the Color Mode button on the remote control to try different color modes for the image and environment.
Solutions When There is No Sound or Low Volume If there is no sound when you expect it or the volume is too low, try the following solutions: • Press a Volume button on the remote control to adjust the volume. • Press the A/V Mute button to resume video and audio if they were temporarily stopped. • Press the Source Search button to switch to the correct input source, if necessary. • Check your computer or video source to make sure the volume is turned up.
• If the projector's lamp shuts off and the power and Temp lights are red, the projector has overheated and shut off. Check the solutions for this light status. • If the power button on the remote control does not turn on the projector, check its batteries and make sure the Remote Receivers setting is turned on in the projector's menus.
Remote Control Operation Solutions to Password Problems If you cannot enter or remember a password, try the following solutions: • You may have turned on password protection without first setting a password. Try entering 0000 using the remote control. • If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson. • If you lose the remote control you cannot enter a password. Order a new one from Epson.
Internet Support Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for solutions to common problems with your projector. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card.
Technical Specifications These sections list the technical specifications of your projector.
Contrast ratio 2000:1 with Auto Iris On and Normal Power Consumption mode Image size 30 to 300 inches (0.8 to 7.6 m) Projection distance PowerLite 1750: 2.36 to 28.8 feet (0.72 to 8.77 m) PowerLite 1760W/1770W/1775W: 2.2 to 26.8 feet (0.67 to 8.
USB Type B port compatibility USB 1.1 and 2.0 compliant for USB display or external mouse control USB Type A port compatibility One USB 1.1 and 2.0 compliant port for USB device input or document camera display Parent topic: Technical Specifications Projector Lamp Specifications Type UHE (Ultra High Efficiency) Power consumption PowerLite 1750/1770W/1775W: 230 W PowerLite 1760W: 205 W Lamp life Up to about 4000 hours Note: Turn off this product when not in use to prolong the life of the projector.
Depth 8.3 inches (210 mm) Weight PowerLite 1750: 3.66 lb (1.66 kg) PowerLite 1760W/1770W: 3.7 lb (1.68 kg) PowerLite 1775W: 3.77 lb (1.71 kg) Parent topic: Technical Specifications Projector Electrical Specifications Rated frequency 50/60 Hz Power supply 100 to 240 VAC ±10% PowerLite 1760W: 3 to 1.4 A PowerLite 1750/1770W/1775W: 3.3 to 1.5 A Power consumption PowerLite 1760W: (100 to 120 V) Operating: 293 W Standby: 0.38 W (Communication Off), 7.
Power consumption PowerLite 1760W: (200 to 240 V) Operating: 278 W Standby: 0.44 W (Communication Off), 7.7 W (Communication On) PowerLite 1750/1770W/1775W: Operating: 304 W Standby: 0.44 W (Communication Off), 7.
Supported Video Display Formats For best results, your computer monitor or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically. Your computer's monitor or video card refresh rate (vertical frequency) must be compatible with the projector. (See your computer or video card manual for details.
Display format Refresh rate (in Hz) Resolution (in pixels) TV (NTSC) 60 720 × 480 TV (PAL) 50/60 720 × 576 TV (SECAM) 50 720 × 576 SDTV (480i) 60 720 × 480 SDTV (576i) 50 720 × 576 SDTV (480p) 60 720 × 480 SDTV (576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30/50/60 1920 × 1080 Component video HDMI input signals (PowerLite 1760W/1770W/1775W) VGA 60 640 × 480 SVGA 60 800 × 600 XGA 60 1024 × 768 WXGA 60 1280 × 800 S
** Wide resolution only Parent topic: Technical Specifications 160
Notices Check these sections for important notices about your projector. Important Safety Information Important Safety Instructions FCC Compliance Statement Trademarks Software Copyright Copyright Notice Important Safety Information Caution: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers.
• If the projector is mounted on a ceiling, it should be installed by qualified technicians using mounting hardware designed for use with this projector. • When installing or adjusting a ceiling mount, do not use adhesives to prevent the screws from loosening and do not use oils or lubricants. This may cause the projector case to crack and the projector to fall from its ceiling mount. This could cause serious injury to anyone under the mount and could damage the projector.
• Except as specifically explained in this manual, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards. • Never open any covers on the projector except as specifically explained in this manual. Never attempt to disassemble or modify the projector. Refer all repairs to qualified service personnel.
• If the lamp breaks, ventilate the room to prevent gases contained in the lamp from being inhaled or coming in contact with your eyes or mouth. • If the projector is mounted overhead and the lamp breaks, be careful to prevent pieces of glass from falling into your eyes when you open the lamp cover. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada. Parent topic: Notices Trademarks Epson®, Instant Off®, Quick Corner®, EasyMP®, and Easy Management® are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
If you desire to receive the source code of the GPL Programs, please see the "EPSON Projector Contact List" in the User's Guide, and contact the customer support of your region. These GPL Programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.
absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail.
LGPL Programs glibc-2.10 SDL-1.2.13 SDL-Image The GNU Lesser General Public License Version 2 is as follows. You also can see the GNU Lesser General Public License Version 2 at http://www.gnu.org/licenses/. GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright ©) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5.
and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.
Copyright ©) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3.
In plain English: 1. We don't promise that this software works. (But if you find any bugs, please let us know!) 2. You can use this software for whatever you want. You don't have to pay us. 3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in your documentation that you've used the IJG code.
The Unix configuration script "configure" was produced with GNU Autoconf. It is copyright by the Free Software Foundation but is freely distributable. The same holds for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh). Another support script, install-sh, is copyright by M.I.T. but is also freely distributable. It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, AT&T, and Mitsubishi.
libpng version 1.2.6, September 12, 2004, is Copyright ©) 2004 Glenn Randers-Pehrson, and is distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors Cosmin Truta libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright ©) 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.0.
For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc.
zlib This projector product includes the open source software program "zlib" which applies the terms and conditions provided by owner of the copyright to the "zlib". The "zlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of zlib programs zlib-1.1.4 License terms of conditions of each program which are provided by owner of the copyright to the “zlib” are as follows.
libmd5-rfc This projector product includes the open source software program "libmd5-rfc" which applies the terms and conditions provided by owner of the copyright to the "libmd5-rfc". The "libmd5-rfc" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of libmd5-rfc programs libmd5-rfc License terms of conditions of each program which are provided by owner of the copyright to the "libmd5-rfc" are as follows.
1999-10-18 lpd Fixed typo in header comment (ansi2knr rather than md5); added conditionalization for C++ compilation from Martin Purschke . 1999-05-03 lpd Original version. mDNSResponder This projector product includes the open source software program "mDNSResponder" which applies the following license terms "Apache License Version 2.0, January 2004". List of "mDNSResponder" mDNSResponder-107.6 (only mDNSResponderPosix is used) License terms "Apache License Version 2.
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
©) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not per
stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.
