User's Guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Displaying and Adjusting the Image
- Using the Remote Control
- Connecting to Computers, Cameras, and Other Equipment
- Setting Up Network Projection
- Using Quick Wireless Connection
- Configuring Basic Settings
- Configuring the Connection
- Using Wireless Security Options
- Using the EasyMP Software
- Removing the Wireless 802.11a/b/g Module
- Connecting to a Wired Network
- Using Projector E-mail Alerts
- Using SNMP to Monitor the Projector
- Connecting With Windows Vista
- Fine-Tuning the Projector
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index
96 Setting Up Network Projection
■ To locate the projector by IP address, select Enter the
projector address
. You see this screen:
Enter the IP address for the projector in the format shown.
Enter a password for the projector if one has been set. Then
click
Connect.
5. If you need to pause your presentation, press the
Pause button.
Click
Resume when you are ready to continue.
6. When you want to disconnect from the projector, click the
Disconnect button.
Vista Network Projector Limitations
When you connect wirelessly to the projector using Vista Network
Projector, be aware of the following limitations:
■ You can connect to only one projector at a time.
■ You cannot connect the projector to a PC with a video output
resolution in excess of 1024 × 768 (XGA).
■ You cannot project a Windows Photo Gallery slideshow in
full-screen mode.
■ When using the optional network projector feature of the
Meeting Space function, set the display color quality on your PC
to Highest (32-bit).
■ Network presentation via wireless ad-hoc is not supported.