User's Guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Displaying and Adjusting the Image
- Using the Remote Control
- Connecting to Computers, Cameras, and Other Equipment
- Setting Up Network Projection
- Using Quick Wireless Connection
- Configuring Basic Settings
- Configuring the Connection
- Using Wireless Security Options
- Using the EasyMP Software
- Removing the Wireless 802.11a/b/g Module
- Connecting to a Wired Network
- Using Projector E-mail Alerts
- Using SNMP to Monitor the Projector
- Connecting With Windows Vista
- Fine-Tuning the Projector
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index
Setting Up Network Projection 85
Enabling EAP, LEAP, or PEAP Authentication
1. Press Menu. Highlight Network and then press Enter.
2. Choose
Network Configuration and press Enter.
3. Highlight
Security, then press Enter. You see the following
screen:
4. Press
Enter to show the menu, then choose one of the EAP,
LEAP, or PEAP options and press Enter.
5. Enter the user name and password that match the settings on your
authentication server: