User's Guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Displaying and Adjusting the Image
- Using the Remote Control
- Connecting to Computers, Cameras, and Other Equipment
- Setting Up Network Projection
- Using Quick Wireless Connection
- Configuring Basic Settings
- Configuring the Connection
- Using Wireless Security Options
- Using the EasyMP Software
- Removing the Wireless 802.11a/b/g Module
- Connecting to a Wired Network
- Using Projector E-mail Alerts
- Using SNMP to Monitor the Projector
- Connecting With Windows Vista
- Fine-Tuning the Projector
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index
Setting Up Network Projection 81
See the following sections to enable security options on your
projector:
■ “Enabling WEP Encryption” below
■ “Enabling WPA Security” on page 83
■ “Enabling EAP, LEAP, or PEAP Authentication” on page 85
■ “Enabling EAP-TLS Certificate Validation” on page 86
You also need to enable security settings from EMP NS Connection
(see page 88).
Enabling WEP Encryption
1. Press Menu on the projector remote. Highlight Network and
then press
Enter.
2. Choose
Network Configuration and press Enter.
3. Highlight
Security, then press Enter. You see the following
screen: