User's Guide

80 Setting Up Network Projection
Using Wireless Security Options
The projector includes the following network security options which
you can enable for network projection:
■ Data encryption
WEP and WPA encryption to encode transmitted data.
■ Connection limitation (Authentication)
EAP-TLS certificate validation, or LEAP, EAP, or PEAP
authentication.
A user’s name and a password are registered in
advance, which means that only the registered wireless port can
connect to the network and prevents unauthorized third parties
from connecting to the network.
The security functions that can be used with this projector vary
depending on the connection mode:
■ Quick Connection Mode
Encrypted communication
■ Advanced Connection Mode
Encrypted communication, WEP, WPA-PSK (TKIP), WPA-PSK
(AES), EAP-TLS, EAP-TTLS/MD5, EAP-TTLS/MS-CHAPv2,
PEAP/MS-CHAPv2, PEAP/GTC, LEAP,
EAP-FAST/MS-CHAPv2, EAP-FAST/GTC
Make sure the settings you select match the ones used by your
network; follow the directions from your network administrator. If
using EAP, you need to make settings at the projector that match the
authentication server settings. Check with your network administrator
for details on RADIUS settings.
note
The authentication and
firewall features are only
effective when the access
point for the connection
destination supports the
same functions.