User's Guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Displaying and Adjusting the Image
- Using the Remote Control
- Connecting to Computers, Cameras, and Other Equipment
- Setting Up Network Projection
- Using Quick Wireless Connection
- Configuring Basic Settings
- Configuring the Connection
- Using Wireless Security Options
- Using the EasyMP Software
- Removing the Wireless 802.11a/b/g Module
- Connecting to a Wired Network
- Using Projector E-mail Alerts
- Using SNMP to Monitor the Projector
- Connecting With Windows Vista
- Fine-Tuning the Projector
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index
76 Setting Up Network Projection
4. Select
To Setup Wizard, then press Enter. You see the WPS
(Wi-Fi Protected Setup) connection screen:
5. For the Push Button Method, follow the instructions below.
For the PIN Code Method, follow the instructions on page 78.
Using the Push Button Method
1. Select Push Button Method and press Enter. You see this screen:
2. Press the
Enter button on the projector.