User's Guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Displaying and Adjusting the Image
- Using the Remote Control
- Connecting to Computers, Cameras, and Other Equipment
- Setting Up Network Projection
- Using Quick Wireless Connection
- Configuring Basic Settings
- Configuring the Connection
- Using Wireless Security Options
- Using the EasyMP Software
- Removing the Wireless 802.11a/b/g Module
- Connecting to a Wired Network
- Using Projector E-mail Alerts
- Using SNMP to Monitor the Projector
- Connecting With Windows Vista
- Fine-Tuning the Projector
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index
Connecting to Computers, Cameras, and Other Equipment 51
Connecting External Speakers
When you use EasyMP, you can output the sound to external speakers
with a built-in amplifier.
To connect speakers to the projector, follow these steps:
1. If your speakers have a stereo mini-jack connector, connect it to
the
Audio port on the projector. If your speakers have two RCA
stereo jacks, use the audio adapter included with the projector.
2. Set the EasyMP Audio Out option in the projector’s Settings
menu to
External. See page 105 for instructions.
The projector’s internal speaker system is disabled while sound is
output to external speakers.