User's Guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Displaying and Adjusting the Image
- Using the Remote Control
- Connecting to Computers, Cameras, and Other Equipment
- Setting Up Network Projection
- Using Quick Wireless Connection
- Configuring Basic Settings
- Configuring the Connection
- Using Wireless Security Options
- Using the EasyMP Software
- Removing the Wireless 802.11a/b/g Module
- Connecting to a Wired Network
- Using Projector E-mail Alerts
- Using SNMP to Monitor the Projector
- Connecting With Windows Vista
- Fine-Tuning the Projector
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index
50 Connecting to Computers, Cameras, and Other Equipment
Playing Sound Through the Projector
You can play sound through the projector’s speaker system or attach
an external speaker system (for EasyMP use only).
To play sound through the projector, follow these steps:
1. Locate the appropriate cable and connect it to the
Audio jack on
the projector.
■ For laptop and most desktop computers, use a stereo
mini-jack cable.
■ For video equipment, use an RCA-style audio cable and the
audio adapter included with the projector.
2. Connect the other end of the cable to the audio output
connector(s) on your computer or video equipment.
3. Make sure the
EasyMP Audio Out option in the Settings menu
is set to
Internal. See page 105 for instructions.
Audio
adapter