User's Guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Displaying and Adjusting the Image
- Using the Remote Control
- Connecting to Computers, Cameras, and Other Equipment
- Setting Up Network Projection
- Using Quick Wireless Connection
- Configuring Basic Settings
- Configuring the Connection
- Using Wireless Security Options
- Using the EasyMP Software
- Removing the Wireless 802.11a/b/g Module
- Connecting to a Wired Network
- Using Projector E-mail Alerts
- Using SNMP to Monitor the Projector
- Connecting With Windows Vista
- Fine-Tuning the Projector
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index
46 Connecting to Computers, Cameras, and Other Equipment
Connecting an S-Video Source
1. Locate an S-video cable (one is usually provided with your video
equipment or you can purchase one from Epson; see page 12).
2. Connect the cable to the S-video connector on your player and
the
S-Video connector on the projector:
3. If you want to play sound through the projector, see page 50 for
instructions on connecting audio cables.
4. If you don’t need to make any other connections, see page 15 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the
Search button on the remote control or the Source Search
button on the projector’s control panel.