User's Guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Displaying and Adjusting the Image
- Using the Remote Control
- Connecting to Computers, Cameras, and Other Equipment
- Setting Up Network Projection
- Using Quick Wireless Connection
- Configuring Basic Settings
- Configuring the Connection
- Using Wireless Security Options
- Using the EasyMP Software
- Removing the Wireless 802.11a/b/g Module
- Connecting to a Wired Network
- Using Projector E-mail Alerts
- Using SNMP to Monitor the Projector
- Connecting With Windows Vista
- Fine-Tuning the Projector
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index
Connecting to Computers, Cameras, and Other Equipment 43
The wireless mouse function is supported on systems with a USB port
running Windows or Mac OS
®
.
1. Locate the USB cable that came with your projector.
2. Connect the square end of the cable to the projector’s
Type B
(square) USB port.
3. Connect the flat end of the cable to any available USB port on
your notebook or desktop computer.
4. Set the
USB Type B setting in the projector’s Extended menu to
Link 21L (see page 112).
5. Press the
Computer button on the remote control to select your
computer as the source. (The wireless mouse function doesn’t
work when other sources are selected.)
6. If necessary, configure your computer to work with a USB mouse.
See your computer documentation for details.
USB cable