User's Guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Displaying and Adjusting the Image
- Using the Remote Control
- Connecting to Computers, Cameras, and Other Equipment
- Setting Up Network Projection
- Using Quick Wireless Connection
- Configuring Basic Settings
- Configuring the Connection
- Using Wireless Security Options
- Using the EasyMP Software
- Removing the Wireless 802.11a/b/g Module
- Connecting to a Wired Network
- Using Projector E-mail Alerts
- Using SNMP to Monitor the Projector
- Connecting With Windows Vista
- Fine-Tuning the Projector
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index
30 Using the Remote Control
Turning Off the Picture and Sound
You can use the A/V Mute button on the remote control to turn off
the image and sound. This does the same thing as the A/V Mute slide
(shown on page 16) and is useful if you want to temporarily redirect
your audience’s attention.
■ To turn off the picture and sound, press the A/V Mute button.
The screen turns black.
■ To turn the image and sound back on, press the button again.
You can have the screen turn blue when you press the
A/V Mute
button. You can also have an image, such as a company logo, display
on the screen (see page 108).
Stopping Action
You can use the remote control to stop the action in your video or
computer image.
■ To stop the action and keep the current image on the screen, press
the
Freeze button. The sound continues.
■ To restart it, press the Freeze button again.
note
This function pauses the
image, but not the sound.
Also, because the source
continues to transmit
signals, you won’t resume
the action from the point
you stopped it.