User's Guide
Table Of Contents
- Front Matter
- Contents
- Welcome
- Displaying and Adjusting the Image
- Using the Remote Control
- Connecting to Computers, Cameras, and Other Equipment
- Setting Up Network Projection
- Using Quick Wireless Connection
- Configuring Basic Settings
- Configuring the Connection
- Using Wireless Security Options
- Using the EasyMP Software
- Removing the Wireless 802.11a/b/g Module
- Connecting to a Wired Network
- Using Projector E-mail Alerts
- Using SNMP to Monitor the Projector
- Connecting With Windows Vista
- Fine-Tuning the Projector
- Maintaining the Projector
- Solving Problems
- Projector Installation
- Technical Specifications
- Notices
- Index

141
A
Projector Installation
This appendix provides guidelines on installing the projector in a
permanent location, such as a theater or conference room.
The projector can be installed for four different viewing setups: front
projection, ceiling projection, rear projection onto a semi-transparent
screen, or rear/ceiling projection, as shown:
To project from overhead, you’ll need the optional ceiling mounting
hardware; see page 12 for ordering information. You’ll also need to
select
Front/Ceiling or Rear/Ceiling as the Projection option in the
projector’s Extended menu to flip the image upside-down. To project
from the rear, onto a semi-transparent screen, select
Rear or
Rear/Ceiling (see page 111).
Front projection Rear projection
Rear/ceiling projectionCeiling projection










