Product Support Bulletin
Table Of Contents
- PSB.2009.01.006-Release of Check Tool for Network Projectors V1.00 (for Windows)
- PSB.2009.01.003-EMP SlideMaker2 updated Version 1.30 – provides scenario support for WXGA (1280 x 800) resolution
- PSB.2007.11.005A-EMP Monitor Version 4.21 Release
- PSB.2007.10.001-Test Results of USB Memory, USB Card Readers and CF Cards
- PSB.2007.09.001-EPSON Projector control for Win V.1.00 release
- PSB.2007.08.001-Elmo HV-110XG Document Camera and Projector Compatibility
- PSB.2007.06.002-Release of EasyMP Firmware V.1.10 for USB Display support under Windows Vista™ operating system.
Page 1 of 5
PSB.2007.09.001
EPSON
P
RODUCT
S
UPPORT
B
ULLETIN
Date:
09/25/2007
Originator:
DJS
PSB #:
PSB.2007.09.001
Authorization:
Reference:
TI 06-91e Rev. B
Total Pages:
5
Product(s):
PowerLite 755c / 765c / 835p / 1705c / 1715c / 1815p
Subject:
EPSON Projector control for Win V.1.00 release
This bulletin was created to inform you on the release of the new Epson Projector Control
software version 1.00.
Description:
EPSON Projector Control lets you control the projector from your computer with a one-on-one
connection between your computer and the projector over a network. It allows you to perform
operations, such as turning the projector on/off and switching sources, from your computer
without using the projector’s remote control.
Function:
EPSON Projector Control has 2 modes: Advanced Mode and Simple Mode.
Although there is a difference in main display layouts between the two modes, their operation
procedures are almost the same. The difference is as follows:
Advanced Mode: Each source has each source button. Therefore source can be selected
by clicking each source button directly.
Simple Mode: Source buttons are toggle-type. Therefore source can be switched every
time the toggle-type button is pressed.
[1] Advanced Mode
The main display is larger than that of Simple Mode. Each source has a source button,
so the source can be selected by clicking the applicable source button directly.