Installation guide

4
III. PixiePlus Installation
T
he Projector Controller for Epson is preconfigured to use the
Discrete Power, 4-Button Source, and Volume Control button
modules. To function with the PixiePlus preconfiguration codes,
these button modules must be used.
If you wish to reconfigure the PixiePlus with alternate controls,
you may replace those button modules as needed with buttons
that match the control codes you wish to use. Select the button
insert modules that match the design of your remote control.
For example, if your remote control has a single toggling power
button, select the Toggling Power module.
Reprogramming the PixiePlus RS-232 commands requires use
of the PixiePlus programming tool (PXE-PGM-TOOL).
1. Assemble Insert Modules
Available Insert Moodules
Note: You must choose one (and only one) insert module of
each type. That is, you cannot use two source insert modules
and no volume module.
Control
Blank
VOLUME
Toggling
SOURCE
SOURCE
VIDEO
COMP
SOURCE
comp video
audio
Discrete
(4-Button)
Discrete
(2-Button)
Toggling
POWER
POWER
ON OFF
Discrete
4