Installation guide

V. Reprogram PixiePlus cont’d

You may press a different button for learning at any time,

including buttons that have already been programmed. If you

press a button that is already armed for learning a second time,

it will be disarmed.

If the PixiePlus learns the code, the button will begin flashing

rapidly in Verification Mode. Go to step 7, Verify Learned Keys.

6. To program a button with multiple codes for macro or

round robin commands: Put the PixiePlus in learning mode.

Quickly press the button you wish to program one time for each

code you want it to learn. The PixiePlus will beep once for each

code it expects to learn.

Example: If you wish to program a SOURCE button with three

codes, set thte PixiePlus to Learning Mode and quickly press

the SOURCE button three times. The PixiePlus will beep three

times to indicate it is ready to learn three codes.

The armed key wil indicate it is ready to learn the first code by

flashing once, pausing, flashing once, and so on.

Hold the remote control in the sweet spot you found in step 3.

Press and hold the button on the remote for about a second.

The PixiePlus will beep three times quickly to indicate

successful learning.

Now the button will indicate it is ready to learn the second code

by flashing twice, pausing, flashing twice, and so on.