User's Manual

A-4
WARNING
Use only the AC adapter (A882421) designed for PhotoPC. Use of any
other adapter could cause fire, electrical shock, or injury. Do not alter
the plug on the AC adapter, and do not use the adapter for any purpose
other than powering your PhotoPC camera. If the adapter’s plug
doesn’t fit your outlet, have a proper outlet installed by a qualified
electrician. To avoid radiation danger, do not expose or remove the
ferrite core.
To avoid losing any images or settings, make sure the camera is finished
processing and turned off before you connect or disconnect the AC
adapter. Then follow these steps:
1
Locate the port cover on the side of the camera. Press on the arrows
and slide the cover down to open it.
2
Plug the adapter cable into the DC port on the camera.
TITLE
Cam3 01 eps
arrows
EPSON AMERICA, INC.
Documentation Department
20770 Madrona Avenue, Torrance, CA 90503
[phone]
TITLE
Cam3-02.eps
DATE
6/26/95
DRAWN BY
L Oliver
DC port