User's Manual

3-2
Using PhotoPC with Your Computer
Follow these steps to connect the camera:
1
Locate the port cover on the side of the camera. Press on the arrows
and slide the cover down to open it.
2
Line up the arrow on the cable connector with the notch on the
camera’s serial port. Then insert the connector.
3
Locate a serial port on the back of your computer. You may have
two serial ports labeled COM1 and COM2, or the ports may be
labeled with icons. If you have two serial ports available, use port 1
to connect your camera.
4
Line up the serial connector on the cable with one of the serial ports
on your computer, and insert the connector. Then tighten the
screws.
arrows
EPSON AMERICA, INC.
Documentation Department
20770 Madrona Avenue, Torrance, CA 90503
[phone]
TITLE
Cam3-02.eps
DATE
6/26/95
DRAWN BY
L.Oliver
serial port
arrow
notch