User guide

66 Image Adjustments and Effects
Adding multiple masks
So far we've looked at an individual mask applied to an image. However,
PhotoFix also supports multiple masks where a different set of adjustments can
be applied to each mask. You can therefore build up a patchwork of masked
regions for absolute and selective control of image adjustments.
To apply additional masks:
1. In PhotoFix, click the down arrow on the Filters heading.
2. From the drop-down list, select New....
3. In the Mask Brush pane, change settings and paint as described previously
in "To apply a mask".
4. Click OK. The new mask, named Mask 1, Mask 2, etc. is applied to your image.
5. Apply your adjustments as described previously.
6. Repeat the process for further masks.
Once applied, masks are applied cumulatively. The default global mask is
applied to your image first, then Mask 1, then Mask 2, etc., if present. As a result,
you may wish to rearrange the mask order for different results. You can also
rename and delete masks.
To rearrange, rename or delete a mask:
1. From the down arrow on the Filters heading, select Manage....
2. From the dialog, select a mask and use appropriate supporting buttons.
3. Click OK.
To edit a mask:
1. From the down arrow on the Filters heading, select
your mask name (a check indicates selection).
2. Modify your adjustments as described previously.