Technical data

102 Color and Input/Output Options
Including printer marks
On the Output tab, you can specify whether the program is to print
various marks as well as the image.
Marks and file information can only be printed if the physical paper
size is one inch or more larger all round than the image.
After specifying options, click one of the other tabs to set more options,
or click OK to return to the main Print dialog and save any changes.
Click Cancel to abandon changes.
CMYK color separations
An offset press needs one independent plate for each color that will
print on the job. PhotoPlus will let you choose to print either a
composite copy or color separations which are used when printing the
job to an imagesetter.
If the job is created properly, you then get, for each page, one complete
negative for each color. If you were working on a flyer, you could print
out a composite copy on your laser or ink jet printer which would give
you one piece of paper with the whole flyer, or seps, which would give
you four sheets of paper.
The Separations tab controls the printing of color separations.