Specifications

Troubleshooting Page 53
Part of the image is distorted or blurred.
Edges of the document are not scanned.
Color is patchy or distorted at the edges of the image.
Problem Solution
Your document is not
flat.
Make sure your document is in good condition. Part of the document may
be wrinkled, warped, or not in contact with the document table. Be sure
the document is uniformly flat.
Problem Solution
Your document is too
large.
The document table has non-readable areas around the edges. If part of
your document extends beyond the maximum limits marked on the
document table edge guides, you may have to reposition your document
so that the image you want to scan is within the readable area.
Problem Solution
Your document is not
flat.
If the document is very thick or warped at the edges, the edges of the
image may be discolored. Cover the edges of the document with opaque
paper to block outside light.
Your document is too
large.
If part of the document extends beyond the document table, that edge
may not be in contact with the document table. Change the position of
the document.
ref.book Page 53 Monday, September 28, 1998 4:24 PM