Specifications

Installing the Optional Equipment Page 36
Follow the steps below to load paper into the auto document feeder
(ADF):
1 Slide the right edge guide all the way to the right.
2 Insert the paper stack into the ADF until it meets resistance. Make sure
that the side you want to scan is facing up, with the top edge facing
into the feeder; the first page you want to scan should be on top. Then
move the right edge guide so it is flush with the right edge of your
paper.
Documents are output into the lower tray after scanning is finished.
Make sure no
documents or dust are
on the document table
glass when using the
auto document
feeder. Dust on the
document table glass
near the carriage
home position may
result in vertical lines
on the scanned
images.
ref.book Page 36 Monday, September 28, 1998 4:24 PM