Specifications

Installing the Optional Equipment Page 22

Using Film Holders

Three film holders are included with this unit. To place film in the holders,

see the instructions below.

◗ Placing the Fil

◗ Loading 35 mm Negative or Positive Film

◗ Loading Brownie Size Film

◗ Loading 4 x 5 inch Film

To remove a film holder from the document table, lift it out by its tab.

Placing the Film

Film has two sides, a base side that is shiny and a dull side with the

emulsion. Film should always be loaded in the film holders or placed on

the document table with the base side down.

Hold the film by the

edges or use gloves.

Touching the film

surface with bare

hands can leave

fingerprints or other

marks on the film.

The base side of the

film is the side on

which the film maker’s

name and film ID

numbers are printed.

ref.book Page 22 Monday, September 28, 1998 4:24 PM